[Nut-upsuser] Success with newhidups - Dynex DX-800U

[Peter Selinger]

Thanks, I have added this to our list of supported devices. Do you
know the USB productid and vendorid of this device? Is it 0764/0005?

Developers: I also added new driver variables ups.vendorid and
ups.productid. This will make it easier to get that information from
upsc output. Any objections to this? -- Peter

M.A.E. Hanson wrote:
> 
> Just wanted to report that I have successfully got a Dynex DX-800U UPS
> functioning with the newhidups driver.  This UPS appears to be made by 
> CyberPower Systems and I believe is the same as the CPS 800AVR.
> ---------
> # upsc dynex at localhost
> battery.charge: 66
> battery.charge.low: 10
> battery.charge.warning: 20
> battery.runtime: 399
> battery.runtime.low: 300
> battery.type: PbAcid
> battery.voltage: 19.7
> battery.voltage.nominal: 12.0
> driver.name: newhidups
> driver.parameter.port: auto
> driver.version: 2.0.5
> driver.version.data: APC/CyberPower HID 0.9
> driver.version.internal: 0.30
> input.transfer.high: 140
> input.transfer.low: 90
> input.voltage: 122.0
> input.voltage.nominal: 120
> output.voltage: 122.0
> ups.beeper.status: enabled
> ups.delay.shutdown: -1
> ups.load: 50.0
> ups.mfr: CPS
> ups.model: DX-800U
> ups.power.nominal: 636
> ups.status: OL CHRG LB
> ups.test.result: Done and warning
> ----------
> # upscmd -l dynex at localhost
> Instant commands supported on UPS [dynex at localhost]:
> 
> load.off - Turn off the load immediately
> load.on - Turn on the load immediately
> shutdown.stop - Stop a shutdown in progress
> beeper.on - Enable the UPS beeper
> beeper.off - Disable the UPS beeper
> ----------
> Mike Hanson
> 
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
>