[Nut-upsuser] Second issue (older Belkin 1200VA)

[Justin Piszcz]

Never had a problem until dist-upgrade this morning:

UPS belkin at localhost battery is low

Which is not true, it shows the charge as 100%

I think a bad push was done for nut in Debian/testing?

$ upsc belkin at localhost
battery.charge: 100
battery.charge.low: 30
battery.charge.warning: 50
battery.runtime: 210
battery.type: PbAc
battery.voltage: 27.1
battery.voltage.nominal: 24
driver.name: newhidups
driver.parameter.pollfreq: 5
driver.parameter.port: auto
driver.version: 2.0.5
driver.version.data: Belkin HID 0.1
driver.version.internal: 0.30
input.frequency: 59.8
input.frequency.nominal: 60
input.sensitivity: normal
input.transfer.high: 136
input.transfer.high.max: 141
input.transfer.high.min: 131
input.transfer.low: 90
input.transfer.low.max: 95
input.transfer.low.min: 85
input.voltage: 123.4
input.voltage.nominal: 120
output.frequency: 59.8
output.voltage: 123.4
ups.beeper.status: enabled
ups.delay.restart: 0
ups.delay.shutdown: 0
ups.firmware: 4
ups.load: 33
ups.load.high: 100
ups.mfr: Belkin
ups.mfr.date: 2002/03/01
ups.model: UPS
ups.power.nominal: 1200
ups.serial: D2002337105
ups.status: OL CHRG
ups.test.result: No test initiated
ups.type: offline