[Nut-upsuser] Can not find the Belkin F6H375-USB

[dcw]

On Monday 04 June 2007 6:07 pm, dcw wrote:
> On Sunday 03 June 2007 9:56 pm, dcw wrote:
> > On Sunday 03 June 2007 9:44 pm, you wrote:
> > > On 6/3/07, dcw <dwoody1 at charter.net> wrote:
> > > > On Sunday 03 June 2007 5:49 pm, you wrote:
> > > > > On 6/3/07, Charles Lepple <clepple at gmail.com> wrote:
> > > > > > Since you said this worked under 2.0.4 on Mandriva, I will
> > > > > > suggest that this product ID be added to the driver for the next
> > > > > > release. (The 2.0.4 Belkin HID driver apparently didn't check the
> > > > > > VID at all, just the PID.)
> > > >
> > > > But the 2.0.4 does not work on CentOS5 which is a clone of RHEL5.
> > > > The 2.0.5 does not work on CentOS5 either.
> > > > I added the following line to /etc/udev/rules.d/025_nut-usbups.rules
> > > > for version 2.0.5:
> > > > SYSFS{idVendor}=="050d", SYSFS{idProduct}=="0375", MODE="664",
> > > > GROUP="ups"
> > > >
> > > > This did not help.
> > >
> > > Did you unplug and replug the USB cable after adding this? (I think
> > > there might be a way to tell udev to rescan, but I don't know off the
> > > top of my head how that works.)
> >
> > I am sure I did but I did again, just to make sure.
> >
> > > What does the /proc/bus/usb node for the UPS look like (ls -l)
>
> after/usr/local/ups/bin/newhidups -x productid=0375 -u root -D  auto
>
> > > you add the rule and re-plug the UPS?
> >
> > Everything is owned by root as follows:
> > [root]->l /proc/bus/usb
> > total 0
> > dr-xr-xr-x 2 root root 0 May 28 07:26 001
> > -r--r--r-- 1 root root 0 Jun  3 21:51 devices
> > [root]->l /proc/bus/usb/001
> > total 0
> > -rw-r--r-- 1 root root 43 May 28 07:26 001
> > -rw-r--r-- 1 root root 57 May 28 07:26 003
> > -rw-r--r-- 1 root root 52 Jun  3 21:51 009
> >
> > > > I assume that since it works on Mandriva 2006 and not CentOS5 that
> > > > there is a configuration error on CentOS separate from the nut
> > > > software. Would CentOS mailing list be the best place to ask about
> > > > that or stay with this thread and see if others have any input?
> > >
> > > Can't hurt to ask on the CentOS lists. Someone here might have some
> > > other suggestions, but that's all I have based on the error messages
> > > you sent before.
>
> I have not gotten anything from CentOS yet but I did continue to do some
> research. The following command finds the UPS:
> /usr/local/ups/bin/newhidups -x productid=0375 -u root -D  auto
>
> Trying several different combinations of the above command line I have to
>  have both:
> -x productid=0375
> and
> -u root
> for it to work.
>
> the ups.conf now looks like:
>         driver = newhidups
>         productid=0375
>         port = auto
>
> adding the productid line did not help
>
> I added these lines /etc/udev/rules.d/nut-usbups.rules:
> # Belkin  - Belkin-UBS
> SYSFS{idVendor}=="050d", SYSFS{idProduct}=="0375", MODE="660", GROUP="ups"
> Adding that line did not help either.
>
> FYI, when compiling nut, I use ./configure --with-user=ups
> and user ups is in group ups.
>
> SO, then I tried the upsdrvctl command with -root as an option and it
> appeared to work.
> Running upsd gave a permission denied error.
> What permissions and how do they need to be set for the upsd command to
> work?
After more research here is what makes it work
the ups.conf now looks like:
[ups]
         driver = newhidups
         productid=0375
         port = auto

Inserted the following lines to /etc/udev/rules.d/nut-usbups.rules:
# Belkin  - Belkin-UBS
 SYSFS{idVendor}=="050d", SYSFS{idProduct}=="0375", MODE="660", GROUP="ups"

Then run:
/usr/local/ups/bin/upsdrvctl -u root start
chown ups:ups /var/state/ups/*
/usr/local/ups/sbin/upsd
/usr/local/ups/sbin/upsmon
/usr/local/ups/bin/upsc ups@$HOSTNAME ups.status
The upsc command displays:
	 0L CHRG
I assume the chown command above indicates that there is still a configuration 
that is wrong somewhere.
Everything in /usr/local/ups is owned ups:ups.
Everthing in /var/state is ups:ups
After upsdrvctl is run there are files in /var/state/ups that have the 
ownership changed to root:root.

Any ideas?

David
>
> David
>
> > Will post with CentOS. Will let you know what happens.
> >
> > Thanks for your help,
> >
> > David
> >
> > _______________________________________________
> > Nut-upsuser mailing list
> > Nut-upsuser at lists.alioth.debian.org
> > http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
>
> --
> RD Woodyard, Inc.
>
> -------------------------------------------------------
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser