[Nut-upsuser] INELT Monolith II 1000LT

[Victor A. Prylipko]

It works? but not all.

I can monitoring status of UPS, but can't shutdown UPS.
I tryed to send command to UPS

root at gw#/usr/local/libexec/nut/megatec -a apc -k
Network UPS Tools - Megatec protocol driver 1.5 (2.0.5)
Carlos Rodrigues (c) 2003-2006

Initiating UPS shutdown
Shutting down UPS immediately.

But it still working and send current to output.

How to check why UPS doesn't perform powerdown command ?



Victor A. Prylipko

vic at liniya.ru
http://www.liniya.ru/



----- Original Message ----- 
From: "Victor A. Prylipko" <vic at liniya.ru>
To: "Carlos Rodrigues" <carlos.efr at mail.telepac.pt>
Cc: <nut-upsuser at lists.alioth.debian.org>
Sent: 17 июня 2007 г. 14:09
Subject: Re: [Nut-upsuser] INELT Monolith II 1000LT
>
> But, when I change /dev/cuaa1 to /dev/ttyd1 - it begin work !!!
>