[Nut-upsuser] snmp ups Status: Not supported

[Massimo Martinelli]

Hi

I set up my ups with driver snmp-ups, and it get recognized as a AEC T2003.
In the nut-cgi upstats page input/output/load are displayed corectly, but the 
Status field is marked as "Not supported". 

Is "Status" important to initiate shutdown in case of low battery ? Will my 
server shut down correctly ?

thanks 
Massimo

I include "upsc snmp at localhost" output:

battery.charge: 100.0
battery.runtime: 000.0
battery.runtime.low: 2
battery.voltage: 013.6
driver.name: snmp-ups
driver.parameter.mibs: ietf
driver.parameter.pollfreq: 15
driver.parameter.port: ups.printertrento.it
driver.parameter.snmp_version: v1
driver.version: 2.0.4
driver.version.internal: 0.41
input.frequency: 050.0
input.voltage: 400.0
output.voltage: 4000.0
ups.firmware.aux: 2.38.DK520
ups.load: 047.0
ups.mfr: AEC             T2003
ups.model: T2003

-- 
  Massimo Martinelli
 Printer Trento s.r.l. - Network Administrator
   tel: ++39 0461 957200
   fax: ++39 0461 957210
   url:http://www.printertrento.it

Printer Trento S.r.l. is member of FOGRA
and FSC Certified.