[Nut-upsuser] Tripp Lite SMART2200RMXL2U and Fedora Core 6 (NUT 2.0.3)?

[Andreas Meyer]

Hi,

I'm running Fedora Core 6 and need to monitor a Tripp Lite
SMART2200RMXL2U. I've loaded the nut-2.0.3-2.1 RPM.
The UPS is connected via the provided USB cable,
and that much appears to work:

# dmesg | grep -i tripp
hiddev96: USB HID v1.10 Device [Tripp Lite  TRIPP LITE SMART2200RMXL2U ] on usb-0000:00:1f.4-2

# lspci | grep -i usb
00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (rev 01)

# lsusb
Bus 001 Device 003: ID 09ae:3012 Tripp Lite 
Bus 001 Device 001: ID 0000:0000

However, the tripplite_usb driver doesn't seem to find the UPS:

# tripplite_usb -u root -DDDDDD auto
Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.3)
Warning: This is an experimental driver.
Some features may not function correctly.

debug level is '6'
Checking device (09AE/3012) (001/003)
- VendorID: 09ae
- ProductID: 3012
- Manufacturer: Tripp Lite
- Product: TRIPP LITE SMART2200RMXL2U
- Serial Number: 9550ALCSM538900465
- Bus: 001
Trying to match device
Device does not match - skipping
Checking device (0000/0000) (001/001)
- VendorID: 0000
- ProductID: 0000
- Manufacturer: Linux 2.6.18-1.2798.fc6 uhci_hcd
- Product: UHCI Host Controller
- Serial Number: 0000:00:1f.4
- Bus: 001
Trying to match device
Device does not match - skipping
No appropriate HID device found
No matching USB/HID UPS found

I've also tried various combinations of "-x product=3012" and "-x vendor=09ae" to no avail.

Suggestions?

Thanks,
Andy