[Nut-upsuser] Powerware Prestige 1000VA

nut at deltabbs.org nut at deltabbs.org
Sat May 19 18:25:56 UTC 2007


Hi, Kjell,

Kjell Claesson wrote:
> Can you upgrade to 2.0.5, or any better if you can use the svn trunk. 

Thanks very much for your pointer. I'm currently trying to compile but
it appears to be broken on my Debian (stable) system.

The issue here is that the configure script appears to assume that both
libgd and libXpm will be in the same place, but here libgd is indeed in
/usr/lib, but libXpm is in /usr/X11R6/lib. I know how to fix that in a
plain makefile (adding -L/usr/X11R6/lib just before -lXpm) but I'm not
very good on autoconf stuff.

Anyway, here's the list of alarms you asked about:

ommunications with UPS re-established
Shutdown delay =  120 seconds
Index	Offset	Format	NUT

0015	0000	61	None
0021	0004	61	None
0023	0008	61	None
0027	0012	61	output.frequency
0028	0016	61	input.frequency
0029	0020	61	None
0033	0024	61	battery.voltage
0034	0028	f0	battery.charge
0035	0032	f0	battery.runtime
0036	0036	f0	None
0056	0040	61	input.voltage
0059	0044	61	None
0062	0048	61	ambient.temperature
0071	0052	61	None
0074	0056	61	None
0075	0060	61	None


Length of alarm map: 25

Index	Alarm	Supported

0000	INVERTER_AC_OVER_VOLTAGE	Yes
0001	INVERTER_AC_UNDER_VOLTAGE	Yes
-001	INVERTER_OVER_OR_UNDER_FREQ	No
-001	BYPASS_AC_OVER_VOLTAGE	No
-001	BYPASS_AC_UNDER_VOLTAGE	No
-001	BYPASS_OVER_OR_UNDER_FREQ	No
0002	INPUT_AC_OVER_VOLTAGE	Yes
0003	INPUT_AC_UNDER_VOLTAGE	Yes
-001	INPUT_UNDER_OR_OVER_FREQ	No
-001	OUTPUT_OVER_VOLTAGE	No
-001	OUTPUT_UNDER_VOLTAGE	No
-001	OUTPUT_UNDER_OR_OVER_FREQ	No
-001	REMOTE_EMERGENCY_PWR_OFF	No
-001	REMOTE_GO_TO_BYPASS	No
-001	BUILDING_ALARM_6	No
-001	BUILDING_ALARM_5	No
-001	BUILDING_ALARM_4	No
-001	BUILDING_ALARM_3	No
-001	BUILDING_ALARM_2	No
-001	BUILDING_ALARM_1	No
-001	STATIC_SWITCH_OVER_TEMP	No
-001	CHARGER_OVER_TEMP	No
-001	CHARGER_LOGIC_PWR_FAIL	No
-001	CHARGER_OVER_VOLTAGE_OR_CURRENT	No
0004	INVERTER_OVER_TEMP	Yes
0005	OUTPUT_OVERLOAD	Yes
0006	RECTIFIER_INPUT_OVER_CURRENT	Yes
-001	INVERTER_OUTPUT_OVER_CURRENT	No
0007	DC_LINK_OVER_VOLTAGE	Yes
0008	DC_LINK_UNDER_VOLTAGE	Yes
-001	RECTIFIER_FAILED	No
-001	INVERTER_FAULT	No
-001	BATTERY_CONNECTOR_FAIL	No
-001	BYPASS_BREAKER_FAIL	No
0009	CHARGER_FAIL	Yes
-001	RAMP_UP_FAILED	No
-001	STATIC_SWITCH_FAILED	No
-001	ANALOG_AD_REF_FAIL	No
-001	BYPASS_UNCALIBRATED	No
-001	RECTIFIER_UNCALIBRATED	No
-001	OUTPUT_UNCALIBRATED	No
-001	INVERTER_UNCALIBRATED	No
-001	DC_VOLT_UNCALIBRATED	No
-001	OUTPUT_CURRENT_UNCALIBRATED	No
-001	RECTIFIER_CURRENT_UNCALIBRATED	No
-001	BATTERY_CURRENT_UNCALIBRATED	No
-001	INVERTER_ON_OFF_STAT_FAIL	No
-001	BATTERY_CURRENT_LIMIT	No
0010	INVERTER_STARTUP_FAIL	Yes
-001	ANALOG_BOARD_AD_STAT_FAIL	No
0011	OUTPUT_CURRENT_OVER_100	Yes
-001	BATTERY_GROUND_FAULT	No
-001	WAITING_FOR_CHARGER_SYNC	No
-001	NV_RAM_FAIL	No
-001	ANALOG_BOARD_AD_TIMEOUT	No
-001	SHUTDOWN_IMMINENT	No
-001	BATTERY_LOW	No
0012	UTILITY_FAIL	Yes
-001	OUTPUT_SHORT_CIRCUIT	No
-001	UTILITY_NOT_PRESENT	No
-001	FULL_TIME_CHARGING	No
-001	FAST_BYPASS_COMMAND	No
-001	AD_ERROR	No
-001	INTERNAL_COM_FAIL	No
-001	RECTIFIER_SELFTEST_FAIL	No
-001	RECTIFIER_EEPROM_FAIL	No
-001	RECTIFIER_EPROM_FAIL	No
-001	INPUT_LINE_VOLTAGE_LOSS	No
-001	BATTERY_DC_OVER_VOLTAGE	No
-001	POWER_SUPPLY_OVER_TEMP	No
-001	POWER_SUPPLY_FAIL	No
-001	POWER_SUPPLY_5V_FAIL	No
-001	POWER_SUPPLY_12V_FAIL	No
-001	HEATSINK_OVER_TEMP	No
-001	HEATSINK_TEMP_SENSOR_FAIL	No
-001	RECTIFIER_CURRENT_OVER_125	No
-001	RECTIFIER_FAULT_INTERRUPT_FAIL	No
-001	RECTIFIER_POWER_CAPASITOR_FAIL	No
-001	INVERTER_PROGRAM_STACK_ERROR	No
-001	INVERTER_BOARD_SELFTEST_FAIL	No
-001	INVERTER_AD_SELFTEST_FAIL	No
-001	INVERTER_RAM_SELFTEST_FAIL	No
-001	NV_MEMORY_CHECKSUM_FAIL	No
-001	PROGRAM_CHECKSUM_FAIL	No
-001	INVERTER_CPU_SELFTEST_FAIL	No
-001	NETWORK_NOT_RESPONDING	No
-001	FRONT_PANEL_SELFTEST_FAIL	No
-001	NODE_EEPROM_VERIFICATION_ERROR	No
-001	OUTPUT_AC_OVER_VOLT_TEST_FAIL	No
-001	OUTPUT_DC_OVER_VOLTAGE	No
0013	INPUT_PHASE_ROTATION_ERROR	Yes
-001	INVERTER_RAMP_UP_TEST_FAILED	No
-001	INVERTER_OFF_COMMAND	No
-001	INVERTER_ON_COMMAND	No
-001	TO_BYPASS_COMMAND	No
-001	FROM_BYPASS_COMMAND	No
-001	AUTO_MODE_COMMAND	No
-001	EMERGENCY_SHUTDOWN_COMMAND	No
-001	SETUP_SWITCH_OPEN	No
-001	INVERTER_OVER_VOLT_INT	No
-001	INVERTER_UNDER_VOLT_INT	No
-001	ABSOLUTE_DCOV_ACOV	No
-001	PHASE_A_CURRENT_LIMIT	No
-001	PHASE_B_CURRENT_LIMIT	No
-001	PHASE_C_CURRENT_LIMIT	No
0014	BYPASS_NOT_AVAILABLE	Yes
-001	RECTIFIER_BREAKER_OPEN	No
-001	BATTERY_CONTACTOR_OPEN	No
-001	INVERTER_CONTACTOR_OPEN	No
-001	BYPASS_BREAKER_OPEN	No
-001	INV_BOARD_ACOV_INT_TEST_FAIL	No
-001	INVERTER_OVER_TEMP_TRIP	No
-001	INV_BOARD_ACUV_INT_TEST_FAIL	No
-001	INVERTER_VOLTAGE_FEEDBACK_ERROR	No
-001	DC_UNDER_VOLTAGE_TIMEOUT	No
-001	AC_UNDER_VOLTAGE_TIMEOUT	No
-001	DC_UNDER_VOLTAGE_WHILE_CHARGE	No
-001	INVERTER_VOLTAGE_BIAS_ERROR	No
-001	RECTIFIER_PHASE_ROTATION	No
-001	BYPASS_PHASER_ROTATION	No
-001	SYSTEM_INTERFACE_BOARD_FAIL	No
-001	PARALLEL_BOARD_FAIL	No
-001	LOST_LOAD_SHARING_PHASE_A	No
-001	LOST_LOAD_SHARING_PHASE_B	No
-001	LOST_LOAD_SHARING_PHASE_C	No
-001	DC_OVER_VOLTAGE_TIMEOUT	No
0015	BATTERY_TOTALLY_DISCHARGED	Yes
-001	INVERTER_PHASE_BIAS_ERROR	No
-001	INVERTER_VOLTAGE_BIAS_ERROR_2	No
-001	DC_LINK_BLEED_COMPLETE	No
-001	LARGE_CHARGER_INPUT_CURRENT	No
-001	INV_VOLT_TOO_LOW_FOR_RAMP_LEVEL	No
-001	LOSS_OF_REDUNDANCY	No
-001	LOSS_OF_SYNC_BUS	No
-001	RECTIFIER_BREAKER_SHUNT_TRIP	No
-001	LOSS_OF_CHARGER_SYNC	No
-001	INVERTER_LOW_LEVEL_TEST_TIMEOUT	No
-001	OUTPUT_BREAKER_OPEN	No
-001	CONTROL_POWER_ON	No
-001	INVERTER_ON	No
-001	CHARGER_ON	No
-001	BYPASS_ON	No
-001	BYPASS_POWER_LOSS	No
-001	ON_MANUAL_BYPASS	No
-001	BYPASS_MANUAL_TURN_OFF	No
-001	INVERTER_BLEEDING_DC_LINK_VOLT	No
-001	CPU_ISR_ERROR	No
-001	SYSTEM_ISR_RESTART	No
-001	PARALLEL_DC	No
-001	BATTERY_NEEDS_SERVICE	No
-001	BATTERY_CHARGING	No
-001	BATTERY_NOT_CHARGED	No
-001	DISABLED_BATTERY_TIME	No
-001	SERIES_7000_ENABLE	No
-001	OTHER_UPS_ON	No
-001	PARALLEL_INVERTER	No
-001	UPS_IN_PARALLEL	No
-001	OUTPUT_BREAKER_REALY_FAIL	No
-001	CONTROL_POWER_OFF	No
-001	LEVEL_2_OVERLOAD_PHASE_A	No
-001	LEVEL_2_OVERLOAD_PHASE_B	No
-001	LEVEL_2_OVERLOAD_PHASE_C	No
-001	LEVEL_3_OVERLOAD_PHASE_A	No
-001	LEVEL_3_OVERLOAD_PHASE_B	No
-001	LEVEL_3_OVERLOAD_PHASE_C	No
-001	LEVEL_4_OVERLOAD_PHASE_A	No
-001	LEVEL_4_OVERLOAD_PHASE_B	No
-001	LEVEL_4_OVERLOAD_PHASE_C	No
0016	UPS_ON_BATTERY	Yes
0017	UPS_ON_BYPASS	Yes
-001	LOAD_DUMPED	No
-001	LOAD_ON_INVERTER	No
-001	UPS_ON_COMMAND	No
-001	UPS_OFF_COMMAND	No
-001	LOW_BATTERY_SHUTDOWN	No
-001	AUTO_ON_ENABLED	No
-001	SOFTWARE_INCOMPABILITY_DETECTED	No
-001	INVERTER_TEMP_SENSOR_FAILED	No
-001	DC_START_OCCURED	No
-001	IN_PARALLEL_OPERATION	No
-001	SYNCING_TO_BYPASS	No
-001	RAMPING_UPS_UP	No
-001	INVERTER_ON_DELAY	No
-001	CHARGER_ON_DELAY	No
-001	WAITING_FOR_UTIL_INPUT	No
-001	CLOSE_BYPASS_BREAKER	No
-001	TEMPORARY_BYPASS_OPERATION	No
-001	SYNCING_TO_OUTPUT	No
-001	BYPASS_FAILURE	No
-001	AUTO_OFF_COMMAND_EXECUTED	No
-001	AUTO_ON_COMMAND_EXECUTED	No
-001	BATTERY_TEST_FAILED	No
0018	FUSE_FAIL	Yes
-001	FAN_FAIL	No
-001	SITE_WIRING_FAULT	No
-001	BACKFEED_CONTACTOR_FAIL	No
-001	ON_BUCK	No
-001	ON_BOOST	No
-001	ON_DOUBLE_BOOST	No
-001	BATTERIES_DISCONNECTED	No


-Steve




More information about the Nut-upsuser mailing list