[Nut-upsuser] Belkin F6C1100-UNV

[Alexander I. Gordeev]

On Wed, 23 May 2007 02:35:17 +0400, Eric S. Raymond <esr at thyrsus.com> wrote:

> Peter Selinger <selinger at mathstat.dal.ca>:
>> One potential problem is that you are passing the parameters
>> vendorid=0665 and subdriver=agiler when you start the driver manually,
>> but you are passing no such parameters to upsdrvctl. You can put them
>> into your ups.conf:
>>
>> [myups]
>>         driver = megatec_usb
>>         port = auto
>> 	vendorid = 0665
>> 	subdriver = agiler
>
> Ah, now that seemed to do the trick.
>

This can only be true if you are using an old version of megatec_usb
binary (before revision 903) because I've added your UPS to the list of
known devices (drivers/megatec_usb.c:99). It means that you don't have
to specify these 2 variables.

-- 
   Alexander