[Nut-upsuser] PowerWare 9120 via USB?

[Arnaud Quette]

2007/11/8, Tobias Balle-Petersen <tbp at kontrapunkt.com>:
> Hello....
>
> Kjell Claesson wrote:
> > Then you should get new version of nut as 2.0.4 is past date.
>
> I have updated to nut 2.2.0-1 as suggested. Unfortunately I still get the same type of errors:
>
>
> Network UPS Tools - UPS driver controller 2.2.0-
> Network UPS Tools - BCMXCP UPS driver 0.11 (2.2.0-)
>
> Warning: This is an experimental driver.
> Some features may not function correctly.
>
> Model = PW9120 3000VA
> Firmware = Cont:02.60 Inve:02.60
> Shutdown delay =  120 seconds
> Communications with UPS lost: Receive error (Request command): BLOCK: 17, COMMAND: 35!
>
> Communications with UPS lost: Receive error (Request command): COMMAND: 33
>
> RECONNECT USB DEVICE
>
> Communications with UPS lost: Receive error (Request command): COMMAND: 33
>
> RECONNECT USB DEVICE

we'll need to have more verbose info.
please exec "export USB_DEBUG=3 && /lib/nut/bcmxcp_usb -DDD -a ups1"
and send us the gzip'ed output

Arnaud
-- 
Linux / Unix Expert R&D - MGE Office Protection Systems - http://www.mgeops.com
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://people.debian.org/~aquette/
Free Software Developer - http://arnaud.quette.free.fr/