[Nut-upsuser] PowerWare 9120 via USB?

[Tobias Balle-Petersen]

Hello....

Kjell Claesson wrote:
> Then you should get new version of nut as 2.0.4 is past date.

I have updated to nut 2.2.0-1 as suggested. Unfortunately I still get the same type of errors:


Network UPS Tools - UPS driver controller 2.2.0-
Network UPS Tools - BCMXCP UPS driver 0.11 (2.2.0-)

Warning: This is an experimental driver.
Some features may not function correctly.

Model = PW9120 3000VA
Firmware = Cont:02.60 Inve:02.60
Shutdown delay =  120 seconds
Communications with UPS lost: Receive error (Request command): BLOCK: 17, COMMAND: 35!

Communications with UPS lost: Receive error (Request command): COMMAND: 33

RECONNECT USB DEVICE

Communications with UPS lost: Receive error (Request command): COMMAND: 33

RECONNECT USB DEVICE



My ups.conf looks like this:
[ups1]
        driver = bcmxcp_usb
        port = auto
        desc = "PowerWare 9120"




Thanks,
Tobias