[Nut-upsuser] Incorrect battery status on MGE Pulsar M 3000

[Arjen de Korte]

Oksenchuk Dmitry wrote:

> We have two upses: MGE Pulsar M 3000 and MGE Pulsar EXtreme 3200C. They 
> connect to server by USB. EXtreme works good with usbhid-ups (nut 2.2.1) and 
> newhidups (nut 2.0.5). But Pulsar M doesn't want to work with usbhid-ups.

This is a known problem that is fixed in the development version and 
that will be fixed once nut-2.2.2 is released. Until then, don't use 
nut-2.2.0 if you experience this problem or run the development version. 
We're sorry about the inconvenience.

Best regards, Arjen