[Nut-upsuser] 2.2.2-pre2 64 bit rpm tested on openSUSE 10.3

[Arjen de Korte]

Arjen de Korte wrote:

>> # /etc/ups/upssched.conf
>> CMDSCRIPT /usr/sbin/upssched-cmd
>> #PIPEFN /var/state/ups/upssched.pipe
>> #LOCKFN /var/state/ups/upssched.lock
>> PIPEFN /var/run/ups/upssched.pipe
>> LOCKFN /var/run/ups/upssched.lock
>> AT ONBATT * START-TIMER ups-on-battery-timer 121
>> AT ONLINE * CANCEL-TIMER ups-on-battery-timer
>> AT ONBATT * EXECUTE ups-on-battery
>> AT ONLINE * EXECUTE ups-back-on-line
>>
>> There is no /var/state in openSUSE 10.3, so I changed PIPEFN and LOCKFN to 
>> /var/run and defined directory /var/run/ups.
 >
> We need a pre3 to fix this since this has been a long standing bug. This 
> path is hardcoded in the example configuration, where running 
> ./configure should set this path properly. In fact, Charles fixed this 
> in the trunk, but apparently we didn't backport the fix to Testing. Good 
> catch!

Never mind the above. Apparently, you're using an older upssched.conf 
file. This should be fixed in the .spec file I use.

Best regards, Arjen