[Nut-upsuser] NUT on Mac OSX 10.5

[Михаил А]

Hi!

I have iMac24" computer powered by  Back-UPS CS650IE. (USB)
I Installing NUT using Fink packages from source.

Configuring NUT :

1. /sw/etc/nut/ups.conf

[CS_650]
    driver = newhidups
	port = /dev/ttyS1
2. /sw/etc/nut/upsd.conf

ACL all 0.0.0.0/0
ACL localhost 127.0.0.1/32

ACCEPT localhost
REJECT all

3. /sw/etc/nut/upsd.users

[nobody]
     password  =
     allowfrom = localhost
     upsmon master

4. /sw/etc/nut/upsmon.conf

MONITOR CS_650 at localhost 1 nobody <password> master

Logs  from terminal:

Mon Aug 18 14:28:28 on ttys000
iMac:~ mihailartuhov$ sudo /sw/lib/nut/upsdrvctl start
Password:
Network UPS Tools - UPS driver controller 2.0.5
Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30  
(2.0.5)

Detected a UPS: American Power Conversion/Back-UPS CS 650 FW:817.v4.I  
USB FW:v4
Using subdriver: APC/CyberPower HID 0.9
iMac:~ mihailartuhov$ sudo upsd
Network UPS Tools upsd 2.0.5
/sw/var/run/ups is world readable
/sw/etc/nut/upsd.conf is world readable
Connected to UPS [CS_650]: CS_650
/sw/etc/nut/upsd.users is world readable
iMac:~ mihailartuhov$ sudo upsmon
Network UPS Tools upsmon 2.0.5
UPS: CS_650 at localhost (master) (power value 1)
Using power down flag file /etc/killpower

upsc CS_650 at localhost
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 50
battery.date: 2007/02/13
battery.mfr.date: 2007/02/13
battery.runtime: 1215
battery.runtime.low: 120
battery.temperature: 28
battery.type: PbAc
battery.voltage: 13.5
battery.voltage.nominal: 12.0
driver.name: newhidups
driver.parameter.port: /dev/ttyS1
driver.version: 2.0.5
driver.version.data: APC/CyberPower HID 0.9
driver.version.internal: 0.30
input.voltage: 204.0
input.voltage.nominal: 230
output.voltage: 230.0
output.voltage.nominal: 230.0
ups.beeper.status: enabled
ups.delay.shutdown: -1
ups.firmware: 817.v4.I
ups.firmware.aux: v4
ups.load: 25.0
ups.mfr: American Power Conversion
ups.mfr.date: 2007/02/13
ups.model: Back-UPS CS 650
ups.power.nominal: 566
ups.serial: QB0707231626
ups.status: OL
ups.test.result: No test initiated
iMac:~ mihailartuhov$
iMac:~ mihailartuhov$ upsc CS_650 at localhost
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 50
battery.date: 2007/02/13
battery.mfr.date: 2007/02/13
battery.runtime: 1215
battery.runtime.low: 120
battery.temperature: 28
battery.type: PbAc
battery.voltage: 13.5
battery.voltage.nominal: 12.0
driver.name: newhidups
driver.parameter.port: /dev/ttyS1
driver.version: 2.0.5
driver.version.data: APC/CyberPower HID 0.9
driver.version.internal: 0.30
input.voltage: 204.0
input.voltage.nominal: 230
output.voltage: 230.0
output.voltage.nominal: 230.0
ups.beeper.status: enabled
ups.delay.shutdown: -1
ups.firmware: 817.v4.I
ups.firmware.aux: v4
ups.load: 25.0
ups.mfr: American Power Conversion
ups.mfr.date: 2007/02/13
ups.model: Back-UPS CS 650
ups.power.nominal: 566
ups.serial: QB0707231626
ups.status: OL
ups.test.result: No test initiated
iMac:~ mihailartuhov$


My questions:

  1. input.voltage: 204.0

This value is constant and does not change at each session (only   
change  after restart computer).

Why?


2. Еvery minute I see the messages appear (terminal) :


Broadcast Message from mihailartuhov at iMac.local
         (no tty) at 17:11 JST...

Communications with UPS CS_650 at localhost lost


Broadcast Message from mihailartuhov at iMac.local
         (no tty) at 17:11 JST...

Communications with UPS CS_650 at localhost established


Broadcast Message from mihailartuhov at iMac.local
         (no tty) at 17:12 JST...

Communications with UPS CS_650 at localhost lost


Broadcast Message from mihailartuhov at iMac.local
         (no tty) at 17:12 JST...

Communications with UPS CS_650 at localhost established

.....
Thanks for advance!
Mihail A&
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20080818/2c2f6a08/attachment.htm