[Nut-upsuser] "No matching HID UPS found" with TrippLite SMX1500LCD

[Thierry Thomas]

Selon Roman Serbski <mefystofel at gmail.com> le Lun 25 fév 06:37:23 2008 :

> Hi list-

Hello,

> I'm having problems with TrippLite SMX1500LCD not being detected by
> NUT under FreeBSD 6.3-RC2. NUT 2.2.1 was installed from ports with the
> following options:
>
> WITH_USB=true
> WITH_SNMP=true
> WITHOUT_IPV6=true
> WITH_LIBUPSCLIENT=true
> WITH_CGI=true
>
> I use USB cable shipped with TrippLite and 'usbdevs -v' shows the following:
>
> ...
> Controller /dev/usb2:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x0000), rev 1.00
> port 1 powered
> port 2 addr 2: low speed, power 100 mA, config 1, TRIPP LITE
> UPS(0x2005), Tripp Lite(0x09ae), rev 0.10
> ...
>
> According to http://www.networkupstools.org/compat/stable.html it
> looks like SMX1500LCD is supported (by usbhid-ups).
>
> However, whenever I try to start nut I see the following error:
>
> No matching HID UPS found
> Driver failed to start (exit status=1)

It seems that this product is not known. Could you please try to add  
an entry for it in src/sys/dev/usb/usbdevs ?

Best regards,
-- 
Th. Thomas.