[Nut-upsuser] Powerware UPS 3110 USB

[Patrick Ohearn]

Here is my ups.conf...

[ups-router]
        driver = usbhid-ups
        port = auto
        desc = "Powerware 3110 - Router"

[ups-server]
        driver = usbhid-ups
        port = auto
        desc = "Powerware 3110 - Server"



Here is the output from upsdrvctl start...

Network UPS Tools - UPS driver controller 2.2.0
Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30
(2.2.0)

No matching HID UPS found
Driver failed to start (exit status=1)
Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30
(2.2.0)

No matching HID UPS found
Driver failed to start (exit status=1)


Is there something I am doing wrong right off the bat? If not, is there
anything I can do to debug this, or help this UPS get supported?
-- 
Patrick Ohearn
Email: pat at ge3k.net
XMMP: pat at ge3k.net