[Nut-upsuser] Unitek Alpha 650 ipE

[Arjen de Korte]

[...]

> 	Asking for UPS status [Q1]...
> 	get_data_agiler: raw dump: (0 bytes) =>
> 	get_data_agiler: raw dump: (0 bytes) =>
> 	Q1 => FAILED [short read]
> 	Q1 detail: (0 bytes) =>
> 	5 out of 5 detection attempts failed (minimum failures: 2).
> 	Megatec protocol UPS not detected.
>
> What does that mean? Sounds like a broken UPS... :-(

Try if adding a different 'subdriver' (see 'man 8 megatec_usb') works.
This driver also supports one additional subdriver that isn't listed,
'agiler-old' (the manpage is outdated in this aspect).

Best regards, Arjen
-- 
Eindhoven - The Netherlands
Key fingerprint - 66 4E 03 2C 9D B5 CB 9B  7A FE 7E C1 EE 88 BC 57