[Nut-upsuser] Ippon device does not work

[Авдиенко Михаил]

I have an UPS, that claims to be IPPon Back Power Pro 700. I'm trying to  
connect it using USB.
lsusb -v says:

Bus 1 Device 3: ID 06da:0003 Phoenixtec Power Co., Ltd
Device Descriptor:
   bLength                18
   bDescriptorType         1
   bcdUSB               1.10
   bDeviceClass            0 (Defined at Interface level)
   bDeviceSubClass         0
   bDeviceProtocol         0
   bMaxPacketSize0         8
   idVendor           0x06da Phoenixtec Power Co., Ltd
   idProduct          0x0003
   bcdDevice            4.00
   iManufacturer           3 OMRON
   iProduct                1 USB UPS
   iSerial                 0
   bNumConfigurations      1
   Configuration Descriptor:
     bLength                 9
     bDescriptorType         2
     wTotalLength           34
     bNumInterfaces          1
     bConfigurationValue     1
     iConfiguration          0
     bmAttributes         0xa0
       (Bus Powered)
       Remote Wakeup
     MaxPower              100mA
     Interface Descriptor:
       bLength                 9
       bDescriptorType         4
       bInterfaceNumber        0
       bAlternateSetting       0
       bNumEndpoints           1
       bInterfaceClass         3 Human Interface Devices
       bInterfaceSubClass      0 No Subclass
       bInterfaceProtocol      0 None
       iInterface              0
         HID Device Descriptor:
           bLength                 9
           bDescriptorType        33
           bcdHID               1.11
           bCountryCode            0 Not supported
           bNumDescriptors         1
           bDescriptorType        34 Report
           wDescriptorLength      27
          Report Descriptors:
            ** UNAVAILABLE **
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x81  EP 1 IN
         bmAttributes            3
           Transfer Type            Interrupt
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0008  1x 8 bytes
         bInterval              20
Device Status:     0x0000
   (Bus Powered)

megatec_usb -a ippon -DDD says:

Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb]
Carlos Rodrigues (c) 2003-2007

Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]
Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough (c)  
2007

debug level is '3'
Checking device (06DA/0003) (1/3)
- VendorID: 06da
- ProductID: 0003
- Manufacturer: OMRON
- Product: USB UPS
- Serial Number: unknown
- Bus: 1
Trying to match device
Device does not match - skipping
No appropriate HID device found
No supported devices found. Please check your device availability with  
'lsusb'
and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with at least 'vendorid' and 'subdriver' options
specified. Please refer to the man page for details about these options
(man 8 megatec_usb).
Please report your results to the NUT user's mailing list
<nut-upsuser at lists.alioth.debian.org>.