[Nut-upsuser] Ippon device does not work

[Alexander I. Gordeev]

В сообщении от Thursday 11 September 2008 09:37:30 Авдиенко Михаил написал(а):
> I have an UPS, that claims to be IPPon Back Power Pro 700. I'm trying to
> connect it using USB.
> lsusb -v says:
>
> Bus 1 Device 3: ID 06da:0003 Phoenixtec Power Co., Ltd
> Device Descriptor:
>    bLength                18
>    bDescriptorType         1
>    bcdUSB               1.10
>    bDeviceClass            0 (Defined at Interface level)
>    bDeviceSubClass         0
>    bDeviceProtocol         0
>    bMaxPacketSize0         8
>    idVendor           0x06da Phoenixtec Power Co., Ltd
>    idProduct          0x0003
>    bcdDevice            4.00
>    iManufacturer           3 OMRON
>    iProduct                1 USB UPS
>    iSerial                 0
>    bNumConfigurations      1
>    Configuration Descriptor:
>      bLength                 9
>      bDescriptorType         2
>      wTotalLength           34
>      bNumInterfaces          1
>      bConfigurationValue     1
>      iConfiguration          0
>      bmAttributes         0xa0
>        (Bus Powered)
>        Remote Wakeup
>      MaxPower              100mA
>      Interface Descriptor:
>        bLength                 9
>        bDescriptorType         4
>        bInterfaceNumber        0
>        bAlternateSetting       0
>        bNumEndpoints           1
>        bInterfaceClass         3 Human Interface Devices
>        bInterfaceSubClass      0 No Subclass
>        bInterfaceProtocol      0 None
>        iInterface              0
>          HID Device Descriptor:
>            bLength                 9
>            bDescriptorType        33
>            bcdHID               1.11
>            bCountryCode            0 Not supported
>            bNumDescriptors         1
>            bDescriptorType        34 Report
>            wDescriptorLength      27
>           Report Descriptors:
>             ** UNAVAILABLE **
>        Endpoint Descriptor:
>          bLength                 7
>          bDescriptorType         5
>          bEndpointAddress     0x81  EP 1 IN
>          bmAttributes            3
>            Transfer Type            Interrupt
>            Synch Type               None
>            Usage Type               Data
>          wMaxPacketSize     0x0008  1x 8 bytes
>          bInterval              20
> Device Status:     0x0000
>    (Bus Powered)
>
> megatec_usb -a ippon -DDD says:
>
> Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb]
> Carlos Rodrigues (c) 2003-2007
>
> Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]
> Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough (c)
> 2007
>
> debug level is '3'
> Checking device (06DA/0003) (1/3)
> - VendorID: 06da
> - ProductID: 0003
> - Manufacturer: OMRON
> - Product: USB UPS
> - Serial Number: unknown
> - Bus: 1
> Trying to match device
> Device does not match - skipping
> No appropriate HID device found
> No supported devices found. Please check your device availability with
> 'lsusb'
> and make sure you have an up-to-date version of NUT. If this does not help,
> try running the driver with at least 'vendorid' and 'subdriver' options
> specified. Please refer to the man page for details about these options
> (man 8 megatec_usb).
> Please report your results to the NUT user's mailing list
> <nut-upsuser at lists.alioth.debian.org>.
>

The best thing you can do is to upgrade to 2.2.2. If this is impossible then 
just add these lines to the ups.conf:

[ippon]
	...
	vendorid = 06da
	subdriver = agiler

--
  Alexander