[Nut-upsuser] Powerware9120 not shutting down the UPS

[Deon Bredenhann]

Hi all

I'm busy testing the Powerware9120 and am stuck at the powering down of
the UPS.
I'm running the latest Debian Lenny and here is my versions
Network UPS Tools - UPS driver controller 2.2.2
Network UPS Tools - BCMXCP UPS driver 0.14 (2.2.2)

ups.conf
[pw]
    driver = bcmxcp_usb
    port = auto
    shutdown_delay = 60

I get all the correct info from the UPS and NUT works great and PC
shutsdown on low battery. The only problem is that the UPS itself does
not shut down, so the PC will never come back up when the power is
restored.
I have also tried the bcmxcp and upscode2 drivers from some posts that I
saw in the archive, but none of these return any data.

Anything else I can check?

Thanx a mil

--

Deon
OutProsys - http://www.outprosys.com Data Capture Solutions