[Nut-upsuser] SmartUPS-600 problem with 940-0024C cable

[Christian Ruppert]

On Tuesday 04 August 2009 04:43:28 Charles Lepple wrote:
> On Mon, Aug 3, 2009 at 5:07 PM, Christian Ruppert<spooky85 at gmail.com> wrote:
> > Ok, now I receive something.
> >
> > sending 'b' returns 'CF' or 'D0'.
> > 'Y' as expected 'SM'
> >
> > 'm', 'n' nothing
> > 'Y' is '6FI' (sounds valid)
> > 'a' returns 'D1' (not a long string) and 'D2' if 'Y' was send before.
>
> This looks better. If you check the changes to apcsmart.c, you will
> see that some of the special cases were removed after NUT 2.4.1 was
> released:
>
> http://tinyurl.com/n7ev8q
>
> Your best bet is probably to pull the latest code from SVN, and adjust
> apcsmart.h to match.
>
> http://networkupstools.org/source.html under the Development section.
>
> The apcsmart code seems to verify all of the commands listed in
> compat_tab, but it would probably be good to only include the ones
> that actually exist.

Thanks for the hint!
I'll try the svn version asap.

I just checked some stuff from the proto which might be interesting.
Please take a look at: http://qasl.de/~idl0r/apc.html
I added my results into the list.

-- 
Regards,
Christian Ruppert
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20090804/f3190b16/attachment.pgp>