[Nut-upsuser] UPS disconnects from upsmon after several hours Freebsd 7.2

[Charles Lepple]

Thomas,

did you try running the driver with "-D"? Were there any kernel log messages?

-- 
- Charles Lepple

On Thu, Aug 13, 2009 at 8:39 PM, Charles Lepple<clepple at gmail.com> wrote:
> Were there any kernel log entries about USB errors? I'm not sure what
> FreeBSD does in this regard, but if the cable disconnected completely, there
> will probably be an enumeration message.
> For usbhid-ups, you can kill the driver and start it from the command line
> with an extra "-D" to enable debugging. However, the driver will run in the
> foreground.
> On Aug 13, 2009, at 8:12 PM, Thomas Munn wrote:
>
> I am using usbhid-ups
>
>
> On Thu, Aug 13, 2009 at 8:11 PM, Charles Lepple <clepple at gmail.com> wrote:
>>
>> On Aug 13, 2009, at 3:46 PM, Thomas Munn wrote:
>>
>>> I have successfully compiled NUT, and have noticed usb weirdness. The
>>> machine disconnected at 10:25 this morning tripplite was claiming 'stale
>>> data'. I noticed it this morning after trying to look at things. I
>>> 'replugged' the ups back into the usb port and it was fine. I am running
>>> 2.4.1, freebsd, tripplite Su2200XLA. I did notice that the usb cable was a
>>> little wobbly. Any other ways to see whats going on?  here are a few of my
>>> log entries:
>>
>> Which driver are you using?
>
>