[Nut-upsuser] UPS disconnects from upsmon after several hours Freebsd 7.2
symgryph at gmail.com
Fri Aug 28 14:44:56 UTC 2009
I will try that. The USB weirdness continued with a different cable.
Running freebsd 7.2 current.
On Thu, Aug 27, 2009 at 10:39 PM, Charles Lepple <clepple at gmail.com> wrote:
> did you try running the driver with "-D"? Were there any kernel log
> - Charles Lepple
> On Thu, Aug 13, 2009 at 8:39 PM, Charles Lepple<clepple at gmail.com> wrote:
> > Were there any kernel log entries about USB errors? I'm not sure what
> > FreeBSD does in this regard, but if the cable disconnected completely,
> > will probably be an enumeration message.
> > For usbhid-ups, you can kill the driver and start it from the command
> > with an extra "-D" to enable debugging. However, the driver will run in
> > foreground.
> > On Aug 13, 2009, at 8:12 PM, Thomas Munn wrote:
> > I am using usbhid-ups
> > On Thu, Aug 13, 2009 at 8:11 PM, Charles Lepple <clepple at gmail.com>
> >> On Aug 13, 2009, at 3:46 PM, Thomas Munn wrote:
> >>> I have successfully compiled NUT, and have noticed usb weirdness. The
> >>> machine disconnected at 10:25 this morning tripplite was claiming
> >>> data'. I noticed it this morning after trying to look at things. I
> >>> 'replugged' the ups back into the usb port and it was fine. I am
> >>> 2.4.1, freebsd, tripplite Su2200XLA. I did notice that the usb cable
> was a
> >>> little wobbly. Any other ways to see whats going on? here are a few of
> >>> log entries:
> >> Which driver are you using?
Two Wheels Good, Four Wheels Bad
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Nut-upsuser