[Nut-upsuser] UPS Config

[Arnaud Quette]

Hi Brian

2009/8/18 Brian Hoover <BHoover at viengineering.com>

>  Hello,
>
>
>
> This email is regarding a link someone sent me to a page describing how to
> communicate to an APC power supply.
>
>
>
> http://eu1.networkupstools.org/protocols/apcsmart.html
>
>
>
> I realize you aren’t the owner of the content rkroll is but his contact me
> link is dead.  I got my UPS working just fine so this isn’t a help me
> email.  I just wanted to mention a few things that could be updated on the
> page.  I have a APC model 2200 and to communicate with it serially I needed
> to have the following config on my COM port: 2400 bps/8N1 with a flow
> control of Xon/Xoff.  The link above does not mention that last part.
>
>
>
> Another thing I learned is that for me at least, my UPS wouldn’t talk to me
> at all until I sent it the “Y” command.  I must send this every time the UPS
> is turned off and then back on, or else it will return no communication.
>
>
>
> Didn’t know if you wanted to add this information to that page or confirm
> it to anyone else.  Thanks again.
>
do you mean that you have problems running the apcsmart driver?

cheers,
Arnaud
-- 
Linux / Unix Expert R&D - Eaton - http://www.eaton.com/mgeops
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.free.fr/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20090831/32787815/attachment.htm>