No subject

engineering the UPS's responses to certain commands. I could provide any de=
bug and other info needed to interpret protocol 3005.

DiskStation> ./upsdrvctl -u root start
Network UPS Tools - UPS driver controller 2.4.1
Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.20 (2.4.1)
Warning: This is an experimental driver.
Some features may not function correctly.
Detected a UPS: TRIPP LITE/TRIPP LITE SMX500RT1U
Unknown input voltage range: 0x06
Unknown number of switchable load banks: 0x01
Unit ID: 0
Unknown protocol (3005)Attached to Tripp Lite SMX500RT1U
Unknown value for s[1]: 0x01

DiskStation> ./upsc ups
battery.voltage.nominal: 0
driver.name: tripplite_usb
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.version: 2.4.1
driver.version.internal: 0.20
input.voltage.nominal: 120
ups.debug.0: 30 05 58 58 58 58 0d '0.XXXX.'
ups.debug.D: 00 e3 00 90 0d 00 00 '.......'
ups.debug.L: 14 00 00 07 58 58 0d '....XX.'
ups.debug.load_banks: 0
ups.debug.M: 00 00 00 ed 0d 00 00 '.......'
ups.debug.P: 30 30 35 30 30 58 0d '00500X.'
ups.debug.S: 01 00 00 00 64 00 0d '....d..'
ups.debug.T: 2d 00 01 f4 00 58 0d '.....X.'
ups.debug.V: 06 00 0c 01 58 58 0d '....XX.'
ups.delay.shutdown: 64
ups.firmware: F334403
ups.firmware.aux: protocol 3005
ups.id: 0
ups.mfr: Tripp Lite
ups.model: SMX500RT1U
ups.power.nominal: 500
ups.productid: 0001
ups.status:
ups.vendorid: 09ae



George=0A=0A=0A