[Nut-upsuser] XPCC XVRT-1000 driver

[Jeffrey B. Green]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Kjell Claesson wrote:
> Jeff,
>> The previous values were under load, which I forgot to mention. It has a
>> ~500W server and 10W switch on it.
>>
> 
> Then the ups.load is low also.
> But you should not do the LB shutdown test with the server attached.
> It may  power off without a warning.

The unloaded switch gives:

% upsc xtreme
battery.charge: 98.1
driver.name: powercom
driver.parameter.linevoltage: 120
driver.parameter.manufacturer: XPCC
driver.parameter.modelname: XVRT-1000
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/ttyS0
driver.parameter.type: KIN1500AP
driver.version: 2.2.2
driver.version.internal: $ Revision: 0.5 $
input.frequency: 59.53
input.voltage: 104.4
input.voltage.nominal: 120
output.frequency: 59.53
output.voltage: 105.2
ups.load: 0.2
ups.mfr: XPCC
ups.model: XVRT-1000
ups.model.type: KIN1500AP
ups.serial: Unknown
ups.status: OL

Flipping the on/off switch on a power strip gives:

% upsc xtreme
battery.charge: 204.9
driver.name: powercom
driver.parameter.linevoltage: 120
driver.parameter.manufacturer: XPCC
driver.parameter.modelname: XVRT-1000
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/ttyS0
driver.parameter.type: KIN1500AP
driver.version: 2.2.2
driver.version.internal: $ Revision: 0.5 $
input.frequency: 0.00
input.voltage: 0.0
input.voltage.nominal: 120
output.frequency: 59.53
output.voltage: 19.1
ups.load: -0.4
ups.mfr: XPCC
ups.model: XVRT-1000
ups.model.type: KIN1500AP
ups.serial: Unknown
ups.status: OB

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iEYEARECAAYFAks6TxwACgkQMfiP4rwHDZwN5QCghoJ1xH/IBT5/YXB9kjWj4Qh2
Xv4An3eHyK036D77P3uJFHq8oAEcA04H
=jQe+
-----END PGP SIGNATURE-----