[Nut-upsuser] XPCC XVRT-1000 driver

[Jeffrey B. Green]

Kjell Claesson wrote:
>> The previous values were under load, which I forgot to mention. It has a
>> ~500W server and 10W switch on it.
>>
> 
> Then the ups.load is low also.
> But you should not do the LB shutdown test with the server attached.
> It may  power off without a warning.

The readings just before the nut initiated server shutdown due to LB was:

% upsc xtreme
battery.charge: 47.9
driver.name: powercom
driver.parameter.linevoltage: 120
driver.parameter.manufacturer: XPCC
driver.parameter.modelname: XVRT-1000
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/ttyS0
driver.parameter.type: KIN1500AP
driver.version: 2.2.2
driver.version.internal: $ Revision: 0.5 $
input.frequency: 0.00
input.voltage: 0.0
input.voltage.nominal: 120
output.frequency: 59.53
output.voltage: 13.3
ups.load: 85.5
ups.mfr: XPCC
ups.model: XVRT-1000
ups.model.type: KIN1500AP
ups.serial: Unknown
ups.status: FSD OB LB BOOST


The battery.charge dropped in increments of 5.0.

It started at:

% upsc xtreme
battery.charge: 146.9
driver.name: powercom
driver.parameter.linevoltage: 120
driver.parameter.manufacturer: XPCC
driver.parameter.modelname: XVRT-1000
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/ttyS0
driver.parameter.type: KIN1500AP
driver.version: 2.2.2
driver.version.internal: $ Revision: 0.5 $
input.frequency: 0.00
input.voltage: 0.0
input.voltage.nominal: 120
output.frequency: 59.53
output.voltage: 14.1
ups.load: 67.1
ups.mfr: XPCC
ups.model: XVRT-1000
ups.model.type: KIN1500AP
ups.serial: Unknown
ups.status: OB