[Nut-upsuser] Problem with nut 2.4.1 & Ippon 2000 Smart power on FreeBSD

[vk]

Good day, Arjen.

> Support for libusb is 'experimental' at best in FreeBSD and depending
> on the version you're using, 'unusable'. You may try if adding a small
> delay between sending a command and reading back the reply helps (YMMV):

> --- trunk/drivers/blazer_usb.c  (revision 1861)
> +++ trunk/drivers/blazer_usb.c  (working copy)
> @@ -72,6 +72,7 @@
>         upsdebugx(3, "send: %.*s", (int)strcspn(tmp, "\r"), tmp);

>         memset(buf, 0, buflen);
> +       usleep(300000);

>         for (i = 0; (i <= buflen-8) && (strchr(buf, '\r') == NULL); i += ret) {

> If your UPS also has a serial port available, it is probably more  
> reliable to use a USB to serial converter (that is supported by the  
> kernel) than attempting to run a user space program that attempts to  
> handle USB through libusb.

> Best regards, Arjen

  I  try  add usleep(300000); to blazer_usb and it is not helps. Maybe
  you can tell how use USB to serial converter? And which? 

-- 
С уважением,
 vk                          mailto:vk at union-metall.ru