[Nut-upsuser] Tripplite Smart1500

[Dianne Yumul]

Hello,

We have a Tripplite SMART1500RMXL2U and nut-2.2.0-6.el5 installed on  
Centos 5.3. I've been unsuccessful on getting upsmon to work.

usdrvctl seems to start despite some warnings/errors:

# upsdrvctl start smart1500
Network UPS Tools - UPS driver controller 2.2.0-
Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1  
(2.2.0-)
Warning: This is an experimental driver.
Some features may not function correctly.

Detected a UPS: TRIPP LITE/  Tripp Lite SMART1500RMXL2U
libusb_get_interrupt() returned -110 instead of 8
libusb_get_interrupt() returned -110 instead of 8
libusb_get_interrupt() returned -110 instead of 8
libusb_get_interrupt() returned -110 instead of 8
libusb_get_interrupt() returned -110 instead of 8
libusb_get_interrupt() returned -110 instead of 8
libusb_get_interrupt() returned -110 instead of 8
libusb_get_interrupt() returned -110 instead of 8
libusb_get_interrupt() returned -110 instead of 8
libusb_get_interrupt() returned -110 instead of 8
Unit ID: 257
Unknown protocol (4)Attached to Tripp Lite Tripp Lite SMART1500RMXL2U

upsd looks okay, I'm not sure about upsc:

# upsd
Network UPS Tools upsd 2.2.0-
listening on 0.0.0.0 port 3493
Connected to UPS [smart1500]: tripplite_usb-smart1500
# upsc smart1500 at localhost
battery.voltage.nominal: 48
driver.name: tripplite_usb
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.version: 2.2.0-
driver.version.internal: 0.11.1
input.voltage.nominal: 120
outlet.1.desc: Load 1
outlet.1.id: 1
outlet.1.switch: 1
outlet.1.switchable: 1
outlet.2.desc: Load 2
outlet.2.id: 2
outlet.2.switchable: 0
ups.debug.0: 00 04 58 58 58 58 0d '..XXXX.'
ups.debug.D: 37 38 38 38 0d 00 00 '7888...'
ups.debug.L: 31 38 46 43 45 34 0d '18FCE4.'
ups.debug.load_banks: 1
ups.debug.M: 30 32 38 32 0d 00 00 '0282...'
ups.debug.S: 31 34 30 32 31 30 0d '140210.'
ups.debug.T: 39 30 30 32 35 39 0d '900259.'
ups.debug.V: 31 30 38 31 0d 00 00 '1081...'
ups.delay.shutdown: 64
ups.firmware: F0970.B
ups.firmware.aux: protocol 0004
ups.id: 257
ups.mfr: Tripp Lite
ups.model: Tripp Lite SMART1500RMXL2U
ups.power.nominal: 150
ups.status:

I start upsmon anyways but get the following, I lose communication  
immediately.:

Client monuser at 127.0.0.1 logged into UPS [smart1500]
Communications with UPS smart1500 at localhost lost

Is this because the protocol is unknown? I found stuff on the archive  
and changelog that indicate it may be fixed on nut-2.4.1, but I can't  
find any rpms for Centos 5.3. Is there an easier way than building an  
rpm?

Thank you,

Dianne



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20090605/ecfe382c/attachment.htm>