[Nut-upsuser] APC Smart UPS 900i

[Rene Bartsch]

> Citeren Rene Bartsch <ML at Bartschnet.de>:
>
>> I used the SVN trunk version from about 20 hours ago.
>
> Good. At least we know it is something recent...
>
>> The upper output is from upsc, other commands:
>>
>>
>> The command "upscmd -l su900i at localhost" just returns
>> "Instant commands supported on UPS [su900i]:"
>>
>>
>> The command "upcmd -u admin -p <password> su900i at localhost
>> test.panel.start" does not do or return
>> anything.
>>
>>
>> The command "upsrw -u admin -p <password> su900i at localhost" does not
>> return anything.
>>
>>
>> The command "upsrw -s test.panel.start -u admin -p <password>
>> su900i at localhost" returns
>> "Enter new value for test.panel.start:
>> Unexpected response from upsd: ERR VAR-NOT-SUPPORTED"
>
> All of the above is a waste of effort. Commands and variables that are
> not reported as supported by the driver, won't make it past the
> server. Please have a look at the man pages for upscmd and upsrw on
> how to make them report the list of supported variables.
>
>> When I send an 'A' to the UPS with a quick-hacked-PHP-Script on the
>> serial port (Prolific 2303 USB
>> adapter), the UPS correctly starts beeping.
>>
>> How can I do the driver debug trace?
>
> Fire up the driver directly (*not* through upsdrvctl) and add -DDDDD
> to the startup command line, something along the lines of
>
>      /path/to/apcsmart -a su900i -DDDDD
>
> This will run until you kill it with Ctrl-C. Please post the first 15
> seconds worth of output here.


Command: "/lib/nut/apcsmart -a su900i -DDDDD"

----------------------------------------- snip -------------------------------------------------

Network UPS Tools - APC Smart protocol driver 2.00 (2.4.1)
APC command table version 2.0
debug level is '5'
send_to_all: SETINFO ups.mfr "APC"
Attempting firmware lookup
Attempting to contact older Smart-UPS version
Firmware: [7QI]
APC - Attempting to find command set
send_to_all: SETINFO ups.model "Smart-UPS"
send_to_all: SETINFO ups.serial "00016325"
send_to_all: SETINFO input.voltage "228.1"
update_status
send_to_all: SETINFO ups.status "OL"
send_to_all: DATAOK
Detected Smart-UPS [00016325] on /dev/ttyUSB0
update_status
update_info_all: starting
update_info_all: done
dstate_init: sock /var/lib/nut/apcsmart-su900i open on fd 5
send_to_all: SETINFO driver.version "2.4.1"
send_to_all: SETINFO driver.version.internal "2.00"
send_to_all: SETINFO driver.name "apcsmart"
send_to_all: SETINFO driver.parameter.pollinterval "2"


----------------------------------------- snap -------------------------------------------------

After that it just repeats:

update_status
update_info_normal: starting
update_info_normal: done


There's only an additional 'send_to_all: SETINFO ups.status "OB"' and 'send_to_all: SETINFO
ups.status "OB"' when I switch of the power supply or press the "Test"-Button, but nothing else.


Best regards,

Renne