[Nut-upsuser] Powerware 5115 USB Issue
Greg
greg_roll at hotmail.com
Tue Nov 10 12:03:17 UTC 2009
Hi Arnaud,
Looking close so close. Still didn't work but i'd say the output of this will definitely help you.
Thanks again !!
Greg
==========================================
./bcmxcp_usb -u admin -DDDD -a qnapups
Network UPS Tools - BCMXCP UPS driver 0.23 (2.4.1)
USB communication subdriver 0.18
0.000000 debug level is '4'
0.007653 device 012 opened successfully
0.009485 entering get_answer(31)
0.851688 get_answer: (38 bytes) => ab 01 74 01 02 00 01 04 00 40 00 00 00 00 00 05
0.851843 00 80 06 08 00 50 00 00 00 00 00 00 03 00 1b 18 00 00 00 11 00 2f
0.851895 get_answer: block_number = 1
0.851946 get_answer: data length = 116
0.851996 get_answer: need to read 83 more data
1.951677 get_answer: (167 bytes) => ab 01 74 01 02 00 01 04 00 40 00 00 00 00 00 05
1.951843 00 80 06 08 00 50 00 00 00 00 00 00 03 00 1b 18 00 00 00 11 00 2f 00 00 00
1.951977 40 00 00 00 00 00 05 00 80 06 08 00 50 00 00 00 00 00 00 03 00 1b 18 00 00
1.952115 00 11 00 2f 00 00 00 40 00 00 00 00 00 05 00 80 06 08 00 50 00 00 00 00 00
1.952249 00 03 00 1b 18 00 00 00 11 00 2f 00 00 00 40 00 00 00 00 00 05 00 80 06 08
1.952383 00 50 00 00 00 00 00 00 03 00 1b 18 00 00 00 11 00 2f 00 00 00 40 00 00 00
1.952516 00 00 05 00 80 06 08 00 50 00 00 00 00 00 00 03 00 1b 18 00 00 00 11 00 2f
1.952567 00
1.952612 get_answer: block_number = 1
1.952662 get_answer: data length = 116
1.952712 get_answer: sequence number (1) is ok
1.952769 Communications with UPS lost: get_answer: checksum error!
1.953857 entering get_answer(31)
2.861677 get_answer: (38 bytes) => ab 01 74 01 02 00 01 04 10 00 0a 00 01 00 13 35
2.861831 31 31 35 30 35 30 30 41 00 00 00 00 03 00 1b 18 00 00 00 11 00 2f
2.861884 get_answer: block_number = 1
2.861934 get_answer: data length = 116
2.861985 get_answer: need to read 83 more data
3.971889 get_answer: (167 bytes) => ab 01 74 01 02 00 01 04 10 00 0a 00 01 00 13 35
3.972054 31 31 35 30 35 30 30 41 00 00 00 00 03 00 1b 18 00 00 00 11 00 2f 00 00 00
3.972189 40 00 00 00 00 00 05 00 80 06 08 00 50 00 00 00 00 00 00 03 00 1b 18 00 00
3.972326 00 11 00 2f 00 00 00 40 00 00 00 00 00 05 00 80 06 08 00 50 00 00 00 00 00
3.972460 00 03 00 1b 18 00 00 00 11 00 2f 00 00 00 40 00 00 00 00 00 05 00 80 06 08
3.972594 00 50 00 00 00 00 00 00 03 00 1b 18 00 00 00 11 00 2f 00 00 00 40 00 00 00
3.972728 00 00 05 00 80 06 08 00 50 00 00 00 00 00 00 03 00 1b 18 00 00 00 11 00 2f
3.972779 00
3.972824 get_answer: block_number = 1
3.972873 get_answer: data length = 116
3.972924 get_answer: sequence number (1) is ok
3.972980 Communications with UPS lost: get_answer: checksum error!
3.974053 entering get_answer(31)
4.891682 get_answer: (38 bytes) => ab 01 74 01 02 00 01 04 10 00 0a 00 01 00 13 35
4.891834 31 31 35 30 35 30 30 41 20 20 20 20 20 20 20 20 00 00 00 11 00 2f
4.891887 get_answer: block_number = 1
4.891937 get_answer: data length = 116
4.891989 get_answer: need to read 83 more data
6.001677 get_answer: (167 bytes) => ab 01 74 01 02 00 01 04 10 00 0a 00 01 00 13 35
6.001840 31 31 35 30 35 30 30 41 20 20 20 20 20 20 20 20 00 00 00 11 00 2f 00 00 00
6.001974 40 00 00 00 00 00 05 00 80 06 08 00 50 00 00 00 00 00 00 03 00 1b 18 00 00
6.002111 00 11 00 2f 00 00 00 40 00 00 00 00 00 05 00 80 06 08 00 50 00 00 00 00 00
6.002245 00 03 00 1b 18 00 00 00 11 00 2f 00 00 00 40 00 00 00 00 00 05 00 80 06 08
6.002379 00 50 00 00 00 00 00 00 03 00 1b 18 00 00 00 11 00 2f 00 00 00 40 00 00 00
6.002513 00 00 05 00 80 06 08 00 50 00 00 00 00 00 00 03 00 1b 18 00 00 00 11 00 2f
6.002565 00
6.002610 get_answer: block_number = 1
6.002660 get_answer: data length = 116
6.002711 get_answer: sequence number (1) is ok
6.002768 Communications with UPS lost: get_answer: checksum error!
6.003854 entering get_answer(31)
6.991677 get_answer: (70 bytes) => ab 01 74 01 02 00 01 04 10 00 0a 00 01 00 13 35
6.991839 31 31 35 30 35 30 30 41 20 20 20 20 20 20 20 20 20 20 51 00 00 00 00 00 00
6.991975 40 00 00 00 00 00 05 00 80 06 08 00 50 00 00 00 00 00 00 03 00 1b 18 00 00
6.992038 00 11 00 2f
6.992085 get_answer: block_number = 1
6.992137 get_answer: data length = 116
6.992185 get_answer: need to read 51 more data
8.031839 get_answer: (167 bytes) => ab 01 74 01 02 00 01 04 10 00 0a 00 01 00 13 35
8.032003 31 31 35 30 35 30 30 41 20 20 20 20 20 20 20 20 20 20 51 00 00 00 00 00 00
8.032138 40 00 00 00 00 00 05 00 80 06 08 00 50 00 00 00 00 00 00 03 00 1b 18 00 00
8.032275 00 11 00 2f 00 00 00 40 00 00 00 00 00 05 00 80 06 08 00 50 00 00 00 00 00
8.032409 00 03 00 1b 18 00 00 00 11 00 2f 00 00 00 40 00 00 00 00 00 05 00 80 06 08
8.032543 00 50 00 00 00 00 00 00 03 00 1b 18 00 00 00 11 00 2f 00 00 00 40 00 00 00
8.032677 00 00 05 00 80 06 08 00 50 00 00 00 00 00 00 03 00 1b 18 00 00 00 11 00 2f
8.032728 00
8.032774 get_answer: block_number = 1
8.032824 get_answer: data length = 116
8.032875 get_answer: sequence number (1) is ok
8.032932 Communications with UPS lost: get_answer: checksum error!
8.034019 entering get_answer(31)
9.041687 get_answer: (70 bytes) => ab 01 74 01 02 00 01 04 10 00 0a 00 01 00 13 35
9.041850 31 31 35 30 35 30 30 41 20 20 20 20 20 20 20 20 20 20 51 00 00 00 00 00 00
9.041985 40 00 00 00 00 00 05 00 80 06 08 00 50 00 00 00 00 00 00 03 00 1b 18 00 00
9.042049 00 11 00 2f
9.042095 get_answer: block_number = 1
9.042145 get_answer: data length = 116
9.042195 get_answer: need to read 51 more data
10.081690 get_answer: (167 bytes) => ab 01 74 01 02 00 01 04 10 00 0a 00 01 00 13 35
10.081857 31 31 35 30 35 30 30 41 20 20 20 20 20 20 20 20 20 20 51 00 00 00 00 00 00
10.081994 40 00 00 00 00 00 05 00 80 06 08 00 50 00 00 00 00 00 00 03 00 1b 18 00 00
10.082132 00 11 00 2f 00 00 00 40 00 00 00 00 00 05 00 80 06 08 00 50 00 00 00 00 00
10.082266 00 03 00 1b 18 00 00 00 11 00 2f 00 00 00 40 00 00 00 00 00 05 00 80 06 08
10.082400 00 50 00 00 00 00 00 00 03 00 1b 18 00 00 00 11 00 2f 00 00 00 40 00 00 00
10.082534 00 00 05 00 80 06 08 00 50 00 00 00 00 00 00 03 00 1b 18 00 00 00 11 00 2f
10.082586 00
10.082631 get_answer: block_number = 1
10.082681 get_answer: data length = 116
10.082732 get_answer: sequence number (1) is ok
10.082790 Communications with UPS lost: get_answer: checksum error!
10.082853 Communications with UPS lost: Error executing command
10.083063 Could not communicate with the ups: Resource temporarily unavailable
10.083146 CLOSING
==========================================
From: Arnaud Quette
Sent: Tuesday, November 10, 2009 9:30 PM
To: Greg
Cc: nut-upsuser at lists.alioth.debian.org
Subject: Re: [Nut-upsuser] Powerware 5115 USB Issue
Hi Greg,
2009/10/13 Greg
Hi Arnaud,
Sorry I must have miss-read your post.
Thanks for continuing to look at it. I look forward to the update!
waow, time is going too fast.
a bit later than scheduled, I finally rewrote the data reception function in bcmxcp_usb (latest trunk, r2094).
I've checked that there is no regression on the units I have handy, but since I can't reproduce your issue, I'll rely on you to test and validate.
Hopefully, it should solve your issue, or at least be nearby to.
I'm eagerly waiting for your feedback ;-)
cheers,
Arnaud
--
Linux / Unix Expert R&D - Eaton - http://www.eaton.com/mgeops
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.free.fr/
__________ Information from ESET Smart Security, version of virus signature database 4591 (20091110) __________
The message was checked by ESET Smart Security.
http://www.eset.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20091110/347de7bc/attachment-0001.htm>
More information about the Nut-upsuser
mailing list