[Nut-upsuser] No battery.charge

[vk]

Hi all!
I have a nut 2.4.1 on FreeBSD 7.1 i386. UPS model is IPPON smart smart
power  pro  2000.  When i try to see battery charge, in output it have
not such variable, and i can't control other servers (Win2k3 + WinNUT)
because  they  not knows about current battery charge. How i can solve
that problem? Thanks!

upsc IPPON at localhost:54672
---------------------------
battery.voltage: 27.50
battery.voltage.nominal: 24.0
beeper.status: enabled
driver.name: blazer_ser
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/cuau1
driver.version: 2.4.1
driver.version.internal: 1.51
input.current.nominal: 7.0
input.frequency: 50.0
input.frequency.nominal: 50
input.voltage: 218.5
input.voltage.fault: 219.0
input.voltage.nominal: 220
output.voltage: 217.4
ups.delay.shutdown: 30
ups.delay.start: 180
ups.load: 21
ups.status: OL
ups.temperature: 25.0
ups.type: offline / line interactive

ups.conf
--------------------
[IPPON]
driver = blazer_ser
port = /dev/cuau1
desc = "Ippon Smart power 2000"

upsd.conf
-------------------
LISTEN  127.0.0.1       54672
LISTEN  192.168.0.14    54672
MAXCONN 10

upsmon.conf
-------------------
MONITOR IPPON at localhost:54672 1 monmaster UPS_PASS master
MINSUPPLIES 1
SHUTDOWNCMD "/sbin/shutdown -h +0"
POLLFREQ 5
POLLFREQALERT 5
HOSTSYNC 15
DEADTIME 15
POWERDOWNFLAG /etc/power.shutdown
NOTIFYFLAG ONLINE      SYSLOG+WALL
NOTIFYFLAG ONBATT      SYSLOG+WALL
NOTIFYFLAG LOWBATT     SYSLOG+WALL
NOTIFYFLAG SHUTDOWN    SYSLOG+WALL
RBWARNTIME 43200
NOCOMMWARNTIME 300
FINALDELAY 5



-- 
С уважением,
 vk                          mailto:vk at union-metall.ru