[Nut-upsuser] Tripplite_usb Driver fail on OMNIVS1500

[Arnaud Quette]

2009/9/8 Chris Abel <cabel at wildwood.edu>

> Arnaud Quette <aquette.dev at gmail.com> writes:
> >ok, now you can recompile 2.4.1 with the flags mentioned before, and do
> >only a make (not install)
> >
> >then fire drivers/tripplite_usb -DDDDD -a <upsname defined in
> >/etc/nut/ups.conf>
> # drivers/tripplite_usb -DDDDD -a Tripp-Lite
> bash: drivers/tripplite_usb: No such file or directory
> # tripplite_usb -DDDDD -a Tripp-Lite
> bash: tripplite_usb: command not found
>

seems you don't have libusb-dev installed on your system (needed to compile
the USB drivers).
you can see it in the configure report, ie:
...
build USB drivers: yes
...

so "sudo apt-get install libusb-dev"

>
> >and send us back the output.
> >
> >last question: have you bought this unit recently?
> Yes It was bought just a couple of weeks ago.
>

interesting, I was thinking that tripplite_usb was for older units, not HID
compliant.
the newer runs usbhid-ups, but I'm now wondering if these are HID compliant.
but looking at the lsusb output, the report size seems too short for this.
anyway, just thinking out loudly.

cheers,
Arnaud
-- 
Linux / Unix Expert R&D - Eaton - http://www.eaton.com/mgeops
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.free.fr/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20090908/1d49ca8d/attachment.htm>