[Nut-upsuser] Liebert powersure psp

Steve . iteration69 at gmail.com
Fri Apr 23 20:46:43 UTC 2010

I have a Liebert POWERSURE PSP connected via USB. Cleanly built and
installed from source nut-2.4.3.tar.gz
 using kernel
#cat /proc/bus/usb
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=10af ProdID=0003 Rev= 0.00
S: Manufacturer=Liebert
S: Product=Liebert PSP 350 FW: 02
S: SerialNumber=0404200536BT019
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 20mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=248ms

# ./upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - Generic HID driver 0.34 (2.4.3)
USB communication driver 0.31
This Liebert device (10af:0003) is not (or perhaps not yet) supported
by usbhid-ups. Please make sure you have an up-to-date version of NUT. If
this does not fix the problem, try running the driver with the
'-x productid=0003' option. Please report your results to the NUT user's
mailing list <nut-upsuser at lists.alioth.debian.org>.

No matching HID UPS found
Driver failed to start (exit status=1)

i changed ups.conf from:
driver = usbhid-ups
driver = usbhid-ups -x productid=0003
I recieve the same message as above. Perhaps i'm making an obvious mistake
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20100423/5248668f/attachment.htm>

More information about the Nut-upsuser mailing list