[Nut-upsuser] nut 2.4 et MGE 2200 (suite)

[sabine GOUDARD]

Thanks a lot

It was the good solution

I had always unplug the UPS power cord, but without delay

Now all my config are ok

I have another question

I would want to empty my battery without stop the server

is it possible ?

best regards

----------------message original-----------------
De: "Arnaud Quette" aquette.dev at gmail.com
A: "sabine GOUDARD" sabine.goudard at st-etienne.archi.fr
Copie à: nut-upsuser at lists.alioth.debian.org
Date: Sat, 4 Dec 2010 00:41:04 +0100
----------------------------------------------------------



2010/12/3 sabine GOUDARD <[sabine.goudard at st-etienne.archi.fr ->
mailto:sabine.goudard at st-etienne.archi.fr]>
 Hello

I'm back with another problem

I made a lot of tests with my ups MGE

I worked on my script upssched-cmd
and i stopped several times my ups
etc etc ....

Suddenly my UPS wasn't be detected by my server
I tried restore my system
I tried modify files

without success

my UPS isn't detected by my serveur
When I enter this command
lsusb
I have had no more this
bus001 device 002 : ID 0463:ffff MGE UPS System UPS

I have
bus001 device 001 : ID 1d6b:0001 Linux Foudation 1.1 root hub

When I trie to start driver I have
root at nut:~# upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - Generic HID driver 0.34 (2.4.3)
USB communication driver 0.31
No matching HID UPS found
Driver failed to start (exit status=1)

When I use dmesg command I have this
[ 320.336334] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 366.676076] usb 1-2: new low speed USB device using uhci_hcd and address
14
[ 366.800074] usb 1-2: device descriptor read/64, error -71
[ 367.028081] usb 1-2: device descriptor read/64, error -71
[ 367.244076] usb 1-2: new low speed USB device using uhci_hcd and address
15
[ 367.368072] usb 1-2: device descriptor read/64, error -71
[ 367.592072] usb 1-2: device descriptor read/64, error -71
[ 367.808071] usb 1-2: new low speed USB device using uhci_hcd and address
16
[ 368.216069] usb 1-2: device not accepting address 16, error -71
[ 368.328071] usb 1-2: new low speed USB device using uhci_hcd and address
17
[ 368.736067] usb 1-2: device not accepting address 17, error -71
[ 368.736321] hub 1-0:1.0: unable to enumerate USB device on port 2

I'm worried because I tried to connect ups on another PC
I have the same problem

I try a usb key
lsusb is

Bus 001 Device 018: ID 05dc:a701 Lexar Media, Inc. JumpDrive FireFly
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Is it possible my usb port is HS on my UPS

What can I do


try a hard reset:
- poweroff the UPS (and the loads!)
- unplug the UPS power cord,
- wait ~10 seconds,
- restart everything.

cheers,
Arnaud




 

T
-- 

Sabine GOUDARD - Informatique et Multimédia

Ecole Nationale Supérieure d’Architecture de Saint-Étienne

1, rue Buisson BP 94 42003 Saint-Étienne Cedex 1

Tél. : 04 77 42 37 20 - Fax : 04 77 42 35 40

sabine.goudard at st-etienne.archi.fr

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20101207/fb1b311f/attachment.htm>