[Nut-upsuser] communications lost/established

[ricman]

Scrive Alexander Gordeev <lasaine at lvk.cs.msu.su>:

> Ð’ Sun, 14 Mar 2010 03:00:33 +0100
> ricman at neomedia.it пишет:
> 
> > 
> > ups: atlantis-land HostPower Sinewave Line Interactive 1501 A03-HP1501
> > distro: ubuntustudio 9.10
> > nut: 2.4.1
> > driver: megatec_usb
> > 
> > 
> > using upsc i can get ups value (voltage, battery, etc) but on terminal i
> get
> > lots and lots of these messages:
> > 
> > -------------------------------------------------------------
> > 
> > Broadcast Message from nut at maialinux                                       
>    
> >         (somewhere) at 2:40 ...                                            
>    
> >                                                                            
>    
> > Communications with UPS myups at localhost lost                               
>    
> >                                                                            
>    
> >                                                                            
>    
> > Broadcast Message from nut at maialinux                                       
>    
> >         (somewhere) at 2:40 ...                                            
>    
> >                                                                            
>    
> > Communications with UPS myups at localhost established
> > 
> > -------------------------------------------------------------
> > 
> > and /var/log/daemon.log is full of
> > 
> > Mar 14 02:42:35 maialinux megatec_usb[2767]: ser_send_pace: Device
> detached?
> > (error -5: error sending control message: Operation not permitted)
> > Mar 14 02:42:35 maialinux megatec_usb[2767]: Successfully reconnected
> > Mar 14 02:42:35 maialinux upsmon[2776]: Poll UPS [myups at localhost] failed -
> Data
> > stale
> > Mar 14 02:42:35 maialinux upsmon[2776]: Communications with UPS
> myups at localhost
> > lost
> > Mar 14 02:42:37 maialinux upsd[2769]: UPS [myups] data is no longer stale
> > Mar 14 02:42:39 maialinux megatec_usb[2767]: ser_send_pace: Device
> detached?
> > (error -5: error sending control message: Operation not permitted)
> > Mar 14 02:42:39 maialinux megatec_usb[2767]: Successfully reconnected
> > 
> > 
> > any ideas?
> 
> Could you please try blazer_usb driver and report back the results?
> megatec_usb is now deprecated.
> 
> -- 
>   Alexander
> 


same issue (both terminal and log)

Mar 14 22:48:13 maialinux blazer_usb[2638]: Communications with UPS lost: status
read failed!
Mar 14 22:48:16 maialinux blazer_usb[2638]: Communications with UPS
re-established
Mar 14 22:48:17 maialinux blazer_usb[2638]: Communications with UPS lost: status
read failed!
Mar 14 22:48:23 maialinux blazer_usb[2638]: last message repeated 2 times
Mar 14 22:48:23 maialinux upsd[2640]: Data for UPS [myups] is stale - check
driver
Mar 14 22:48:25 maialinux upsmon[2647]: Poll UPS [myups at localhost] failed - Data
stale
Mar 14 22:48:25 maialinux upsmon[2647]: Communications with UPS myups at localhost
lost
Mar 14 22:48:26 maialinux blazer_usb[2638]: Communications with UPS
re-established
Mar 14 22:48:26 maialinux upsd[2640]: UPS [myups] data is no longer stale
Mar 14 22:48:27 maialinux blazer_usb[2638]: Communications with UPS lost: status
read failed!