[Nut-upsuser] Setting offdelay and ondelay in Smart-UPS 1500 RM units

Jon Bendtsen jbendtsen at laerdal.dk
Fri Nov 12 11:54:06 UTC 2010

On 11/11/2010, at 19.57, Arjen de Korte wrote:

> Citeren Javier Miqueleiz <javier at miqueleiz.com>:
>> This unit uses a different HID path than the stardard one for sending a
>> "load.on.delay" command. As the driver (usbhid-ups) can't find this command,
>> it has to revert to rebooting the UPS. The HID paths involved are:
>> - "UPS.PowerSummary.DelayBeforeStartup": the standard command for triggering
>> a "load.on.delay" in USB units.
>> - "UPS.Output.DelayBeforeStartup": used in this unit for triggering a
>> "load.on.delay". The former doesn't exist.
> Please run the following command
>    /path/to/usbhid-ups -DDD -a upsname > Smart-UPS1500RM.log 2>&1

Are you interested in the same output from  APC Smart-UPS RM 3000VA ?

dkserver:/etc/nut# udevadm info --name=/dev/bus/usb/001/004  --attribute-walk | grep -i product
    ATTRS{product}=="Smart-UPS 3000 RM FW:666.6.I USB FW:7.4"

dkserver:/etc/nut# udevadm info --name=/dev/bus/usb/001/003  --attribute-walk | grep -i product
    ATTR{product}=="Smart-UPS 1500 FW:653.12.I USB FW:4.2"

And maybe also from my 1500 which is not RM?


More information about the Nut-upsuser mailing list