[Nut-upsuser] [HCL] Numeric 3000 SW supported by blazer_ser

[Petr Kubánek]

Hi,

Numeric 3000 SW seems to be supported. Please find entries below. I did
not go through complete shut-down sequence while on site (Bloemfontein,
RSA), but recent power failure (while I was already at Europe) confirms
it works as expected.

- Numeric Digital 3000 SW, seems to be some India based manufacturer

upsc watcher-ups

battery.voltage: 81.70
battery.voltage.nominal: 72.0
beeper.status: enabled
device.mfr: NUMERIC
device.model: 3000 SW
device.type: ups
driver.name: blazer_ser
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/ttyUSB0
driver.version: 2.4.3
driver.version.internal: 1.51
input.current.nominal: 13.0
input.frequency: 50.0
input.frequency.nominal: 50
input.voltage: 221.3
input.voltage.fault: 221.3
input.voltage.nominal: 230
output.voltage: 219.6
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: VER 3.02
ups.load: 11
ups.mfr: NUMERIC
ups.model: 3000 SW
ups.status: OL
ups.temperature: 18.0
ups.type: offline / line interactive

upsrw watcher-ups

(nothing show up)

upscmd -l watcher-ups

Instant commands supported on UPS [watcher-ups]:

beeper.toggle - Toggle the UPS beeper
load.off - Turn off the load immediately
load.on - Turn on the load immediately
shutdown.return - Turn off the load and return when power is back
shutdown.stayoff - Turn off the load and remain off
shutdown.stop - Stop a shutdown in progress
test.battery.start - Start a battery test
test.battery.start.deep - Start a deep battery test
test.battery.start.quick - Start a quick battery test
test.battery.stop - Stop the battery test

Shutdown test (Ubuntu server 10.04.2 LTS):

Apr 24 18:10:29 watcher1 upsmon[1684]: UPS watcher-ups at localhost on battery
Apr 24 18:17:01 watcher1 CRON[20146]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Apr 24 18:34:49 watcher1 upsmon[1684]: UPS watcher-ups at localhost battery is low
Apr 24 18:35:09 watcher1 upsmon[1684]: Giving up on the master for UPS [watcher-ups at localhost]
Apr 24 18:35:09 watcher1 upsmon[1684]: Executing automatic power-fail shutdown
Apr 24 18:35:09 watcher1 upsmon[1684]: Auto logout and shutdown proceeding
Apr 24 18:35:14 watcher1 init: idmapd main process (643) killed by TERM signal
Apr 24 18:35:14 watcher1 init: tty4 main process (949) killed by TERM signal
Apr 24 18:35:14 watcher1 init: tty5 main process (955) killed by TERM signal
Apr 24 18:35:14 watcher1 init: tty2 main process (968) killed by TERM signal
Apr 24 18:35:14 watcher1 init: tty3 main process (969) killed by TERM signal
Apr 24 18:35:14 watcher1 init: tty6 main process (972) killed by TERM signal
Apr 24 18:35:14 watcher1 init: cron main process (975) killed by TERM signal
Apr 24 18:35:14 watcher1 init: tty1 main process (1932) killed by TERM signal
Apr 24 18:35:14 watcher1 acpid: exiting
Apr 24 18:35:15 watcher1 kernel: Kernel logging (proc) stopped.
Apr 24 20:19:22 watcher1 kernel: imklog 4.2.0, log source = /proc/kmsg started.
Apr 24 20:19:22 watcher1 rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="670" x-info="http://www.rsyslog.com"] (re)start

http://www.numericups.com/default.aspx?pageid=c58749e9-aac7-468e-9743-9f56df899646

Thanks a lot.

Petr Kubánek
http://rts2.org