[Nut-upsuser] [HCL] Numeric 3000 SW supported by blazer_ser

[Arnaud Quette]

Hi Petr,

2011/4/25 Petr Kubánek <petr at kubanek.net>

> Hi,
>
> Numeric 3000 SW seems to be supported. Please find entries below. I did
> not go through complete shut-down sequence while on site (Bloemfontein,
> RSA), but recent power failure (while I was already at Europe) confirms
> it works as expected.
>
> - Numeric Digital 3000 SW, seems to be some India based manufacturer
>
> upsc watcher-ups
>
> battery.voltage: 81.70
> battery.voltage.nominal: 72.0
> beeper.status: enabled
> device.mfr: NUMERIC
> device.model: 3000 SW
> device.type: ups
> driver.name: blazer_ser
> driver.parameter.pollinterval: 2
> driver.parameter.port: /dev/ttyUSB0
> driver.version: 2.4.3
> driver.version.internal: 1.51
> input.current.nominal: 13.0
> input.frequency: 50.0
> input.frequency.nominal: 50
> input.voltage: 221.3
> input.voltage.fault: 221.3
> input.voltage.nominal: 230
> output.voltage: 219.6
> ups.delay.shutdown: 30
> ups.delay.start: 180
> ups.firmware: VER 3.02
> ups.load: 11
> ups.mfr: NUMERIC
> ups.model: 3000 SW
> ups.status: OL
> ups.temperature: 18.0
> ups.type: offline / line interactive
>
> upsrw watcher-ups
>
> (nothing show up)
>
> upscmd -l watcher-ups
>
> Instant commands supported on UPS [watcher-ups]:
>
> beeper.toggle - Toggle the UPS beeper
> load.off - Turn off the load immediately
> load.on - Turn on the load immediately
> shutdown.return - Turn off the load and return when power is back
> shutdown.stayoff - Turn off the load and remain off
> shutdown.stop - Stop a shutdown in progress
> test.battery.start - Start a battery test
> test.battery.start.deep - Start a deep battery test
> test.battery.start.quick - Start a quick battery test
> test.battery.stop - Stop the battery test
>
> Shutdown test (Ubuntu server 10.04.2 LTS):
>
> Apr 24 18:10:29 watcher1 upsmon[1684]: UPS watcher-ups at localhost on
> battery
> Apr 24 18:17:01 watcher1 CRON[20146]: (root) CMD (   cd / && run-parts
> --report /etc/cron.hourly)
> Apr 24 18:34:49 watcher1 upsmon[1684]: UPS watcher-ups at localhost battery
> is low
> Apr 24 18:35:09 watcher1 upsmon[1684]: Giving up on the master for UPS
> [watcher-ups at localhost]
> Apr 24 18:35:09 watcher1 upsmon[1684]: Executing automatic power-fail
> shutdown
> Apr 24 18:35:09 watcher1 upsmon[1684]: Auto logout and shutdown proceeding
> Apr 24 18:35:14 watcher1 init: idmapd main process (643) killed by TERM
> signal
> Apr 24 18:35:14 watcher1 init: tty4 main process (949) killed by TERM
> signal
> Apr 24 18:35:14 watcher1 init: tty5 main process (955) killed by TERM
> signal
> Apr 24 18:35:14 watcher1 init: tty2 main process (968) killed by TERM
> signal
> Apr 24 18:35:14 watcher1 init: tty3 main process (969) killed by TERM
> signal
> Apr 24 18:35:14 watcher1 init: tty6 main process (972) killed by TERM
> signal
> Apr 24 18:35:14 watcher1 init: cron main process (975) killed by TERM
> signal
> Apr 24 18:35:14 watcher1 init: tty1 main process (1932) killed by TERM
> signal
> Apr 24 18:35:14 watcher1 acpid: exiting
> Apr 24 18:35:15 watcher1 kernel: Kernel logging (proc) stopped.
> Apr 24 20:19:22 watcher1 kernel: imklog 4.2.0, log source = /proc/kmsg
> started.
> Apr 24 20:19:22 watcher1 rsyslogd: [origin software="rsyslogd"
> swVersion="4.2.0" x-pid="670" x-info="http://www.rsyslog.com"] (re)start
>
>
> http://www.numericups.com/default.aspx?pageid=c58749e9-aac7-468e-9743-9f56df899646
>
> Thanks a lot.
>

thanks a lot for your *perfect* report, commited as r2976 into the
development trunk.

cheers
Arnaud
-- 
Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.free.fr/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20110427/b6a0ba48/attachment.htm>