[Nut-upsuser] Tripp Lite 2010 results

[Matt Behrens]

On 08/21/2011 08:56 PM, Charles Lepple wrote:
> Thanks for the report. (In both NUT 2.6.0 and 2.6.1, this product ID 
> is detected automatically.)
>
> Just to confirm, though, do your voltage readings look right when you 
> run upsc? That ID was flagged as returning battery voltages that are 
> low by a factor of 10.
No, there are a few problems... battery voltage here actually looks like 
it might be 10x high.  Also, this is my first time with nut, but I'm 
pretty sure ups.alarm isn't supposed to say "No battery installed!" ;-)

battery.charge: 100
battery.runtime: 832
battery.type: PbAC
battery.voltage: 135.0
battery.voltage.nominal: 12.0
device.mfr: Tripp Lite
device.model: Tripp Lite UPS
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.productid: 2010
driver.version: 2.4.3
driver.version.data: TrippLite HID 0.4
driver.version.internal: 0.34
input.frequency: 59.9
input.voltage: 118.5
input.voltage.nominal: 120
output.frequency.nominal: 60
output.voltage.nominal: 120
ups.alarm: No battery installed!
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.mfr: Tripp Lite
ups.model: Tripp Lite UPS
ups.power.nominal: 1000
ups.productid: 2010
ups.status: ALARM OL
ups.timer.reboot: 65535
ups.timer.shutdown: 65535
ups.vendorid: 09ae
ups.watchdog.status: 0