[Nut-upsuser] Support of & amp; amp; amp; quot; shutdown.return& amp; amp; amp; quot; on a APC Back-UPS CS 500

[Kevin]

Kevin <bakdong <at> gmail.com> writes:

Sorry, this is the correct output for the Smart-UPS 1000


# clients/upsc apc1500
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 50
battery.mfr.date: 2007/07/07
battery.runtime: 6300
battery.runtime.low: 120
battery.temperature: 31.5
battery.type: PbAc
battery.voltage: 27.4
battery.voltage.nominal: 24.0
device.mfr: American Power Conversion
device.model: Smart-UPS 1000
device.serial: AS0727233122
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.version: 2.6.0
driver.version.data: APC HID 0.95
driver.version.internal: 0.35
input.sensitivity: high
input.voltage: 226.0
output.voltage: 226.0
output.voltage.nominal: 230.0
ups.beeper.status: disabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.firmware: 652.13.I
ups.firmware.aux: 7.3
ups.load: 5.2
ups.mfr: American Power Conversion
ups.mfr.date: 2007/07/07
ups.model: Smart-UPS 1000
ups.productid: 0002
ups.serial: AS0727233122
ups.status: OL
ups.test.result: No test initiated
ups.timer.reboot: -1
ups.timer.shutdown: -1
ups.timer.start: -1
ups.vendorid: 051d