[Nut-upsuser] POWEREX VI 1000 LED

[Arnaud Quette]

2011/7/18 Sergey Talchuk <tals1975 at gmail.com>

> Hi Arnaud,
>

Hi Sergey,

first, please keep the traffic on the list. Even if you're not subscribed,
there may be people interested in the below information...


> The UPS had successful shutdown on COMMUNICATION LOST and on TIMER with 60
> seconds delay.
>

I guess from the above that the TIMER was related to "on battery" condition.
I would like to ensure that OB and LB ups.status conditions are handled.
could you please check for these and send back upsc outputs?
note that there should be no load apart from dumb things (like light bulbs)
attached to the UPS... just in case.

cheers,
Arnaud
-- 
Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.free.fr/

Please find the output from other commands in the attached file.
>
> thanks,
> Sergey
>
> On Sun, Jul 17, 2011 at 11:44 AM, Arnaud Quette <aquette.dev at gmail.com>wrote:
>
>> Hi Sergey,
>>
>> 2011/7/15 Sergey Talchuk <tals1975 at gmail.com>
>>
>>> Hi Arnaud,
>>>
>>> both configurations are ok :). Please find the file attached.
>>>
>>
>> logic since the 2nd is automatically guessed from the first using USB
>> Vendor and Product ID ;-)
>>
>> can you please send in upsc, upscmd and upsrw output.
>> and also report the shutdown testing as described here:
>>
>> http://www.networkupstools.org/docs/user-manual.chunked/ar01s06.html#Shutdown_design
>>
>> I'll then add this model to the HCL.
>>
>> cheers,
>> Arnaud
>>
>>
>>> thanks,
>>> Sergey
>>>
>>> P.S. Have nice weekend
>>>
>>>
>>> On Wed, Jul 13, 2011 at 6:20 PM, Arnaud Quette <aquette.dev at gmail.com>wrote:
>>>
>>>>
>>>> 2011/7/13 Sergey Talchuk <tals1975 at gmail.com>
>>>>
>>>>> Hi Arnaud,
>>>>>
>>>>
>>>> Hi Sergey,
>>>>
>>>>
>>>>>  A friend of mine bought an UPS: “POWEREX VI 1000 LED”.
>>>>> http://www.powerexups.aiptek.de/products.html
>>>>> As far as I know he doesn’t want to use NUT for windows, since he is
>>>>> quite happy with the software delivered on the CD :)
>>>>> http://www.power-software-download.com/viewpower.html
>>>>>
>>>>> But I was wondering if NUT can work with the UPS.
>>>>> And it seems “POWEREX VI 1000 LED” can work with ‘blazer_usb’ driver
>>>>> (see below)
>>>>>
>>>>> # lsusb -d 0665:5161
>>>>> Bus 002 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial
>>>>>
>>>>
>>>> well, though it won't be as good as an Eaton (standard disclaimer ;-),
>>>> this one should indeed be supported by the blazer drivers.
>>>>
>>>> Not fully sure if it's with blazer_usb (cypress subdriver) and port
>>>> "auto" or with blazer and port "/dev/ttyUSB0" though. Try the former
>>>> first...
>>>>
>>>> please report back on the list so that we can add it to the compat list.
>>>>
>>>> cheers,
>>>> Arnaud
>>>> --
>>>> Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com
>>>> Network UPS Tools (NUT) Project Leader -
>>>> http://www.networkupstools.org/
>>>> Debian Developer - http://www.debian.org
>>>> Free Software Developer - http://arnaud.quette.free.fr/
>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20110718/646bd000/attachment.html>
-------------- next part --------------
$ upsc powerex

battery.voltage: 27.80
battery.voltage.nominal: 24.0
beeper.status: enabled
device.type: ups
driver.name: blazer_usb
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.productid: 5161
driver.parameter.subdriver: cypress
driver.parameter.vendorid: 0665
driver.version: 2.6.0
driver.version.internal: 0.03
input.current.nominal: 5.0
input.frequency: 49.9
input.frequency.nominal: 50
input.voltage: 229.7
input.voltage.fault: 229.2
input.voltage.nominal: 220
output.voltage: 229.7
ups.delay.shutdown: 30
ups.delay.start: 180
ups.load: 10.0
ups.productid: 5161
ups.status: OL
ups.type: offline / line interactive
ups.vendorid: 0665

====
$upscmd -l powerex

Instant commands supported on UPS [powerex]:

beeper.toggle - Toggle the UPS beeper
load.off - Turn off the load immediately
load.on - Turn on the load immediately
shutdown.return - Turn off the load and return when power is back
shutdown.stayoff - Turn off the load and remain off
shutdown.stop - Stop a shutdown in progress
test.battery.start - Start a battery test
test.battery.start.deep - Start a deep battery test
test.battery.start.quick - Start a quick battery test
test.battery.stop - Stop the battery test


===
$ upsrw powerex

====