[Nut-upsuser] UPS Liebert GXT3 config

[Charles Lepple]

On May 31, 2011, at 10:37 PM, Charles Lepple wrote:

> On May 31, 2011, at 12:01 PM, Juan Pablo Valles wrote:
>>    0.178799     Unable to get HID descriptor (error sending control  
>> message: Protocol error)
>>    0.178818     i=0, extra[i]=09, extra[i+1]=21
>>    0.178835     HID descriptor, method 2: (9 bytes) => 09 21 00 01  
>> 00 01 22 04 01
>>    0.178847     HID descriptor length 260
>>    0.179805     Unable to get Report descriptor: Protocol error
>>
>> The device matches but is unable to get HID descriptor.
>
> You can try searching the archives for more information. I think  
> there was one patch to this code after 2.6.0 came out, so you could  
> try an SVN snapshot such as this one:
>
> http://ocelot.ghz.cc/~buildbot/nut-2.6.0-r3015.tar.gz

Any luck with the SVN snapshot, or the 2.6.1 release?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20110608/2a6714f6/attachment.html>