[Nut-upsuser] problem starting upsd

[James]

On 03/13/11 06:30, Arjen de Korte wrote:
> Citeren James <bjlockie at lockie.ca>:
>
>> $ sudo /usr/sbin/upsd -DDDD
>> Network UPS Tools upsd 2.4.3
>>    0.000000     listen_add: added ::1:3493
>>    0.000084     listen_add: added 127.0.0.1:3493
>>    0.000102     setuptcp: try to bind to 127.0.0.1 port 3493
>>    0.000185     listening on 127.0.0.1 port 3493
>>    0.000204     setuptcp: try to bind to ::1 port 3493
>>    0.001328     setuptcp: socket: Address family not supported by
>> protocol
>>    0.001381     not listening on ::1 port 3493
>
> Apparently the version of NUT you're using was built on a system that
> had IPv6 enabled and yours doesn't. Adding
>
>     LISTEN 127.0.0.1
>
> to 'upsd.conf' should fix this. See also 'man 5 upsd.conf'.
>
> Best regards, Arjen
Awesome, thanks so much.
That fixed it.