[Nut-upsuser] Liebert PSIXR 3000 intellislot web card support with NUT 2.6.0

[John Huong]

Hi Arnaud,

Sure I am willing to take this up. Will need guidance on how to get started
as I am new to doing stuff like SNMP walks.
Just lead the way :) .
 On Mar 23, 2011 5:29 PM, "Arnaud Quette" <aquette.dev at gmail.com> wrote:
> Hi John,
>
> 2011/3/16 John Huong <jahuong at gmail.com>
>
>> Hi,
>>
>> Just started using NUT with a Liebert PSI-XR 3000 with an Intellislot web
>> card.
>>
>> It seems I can't get it to run properly.
>>
>> I am using NUT 2.6.0 built from source on Ubuntu 8.0.4 .
>>
>> My build parameters are :
>>
>> ./configure --enable-strip
>> --with-linux-hiddev=/usr/include/linux/hiddev.h
>> --with-udev-dir=/lib/udev \
>> --prefix=/usr \
>> --exec-prefix=/ \
>> --sysconfdir=/etc/nut \
>> --mandir=/usr/share/man \
>> --libdir=/lib \
>> --includedir=/usr/include \
>> --without-ssl \
>> --with-dev \
>> --enable-static \
>> --with-statepath=/var/run/nut \
>> --with-altpidpath=/var/run/nut \
>> --with-drvpath=/lib/nut \
>> --with-htmlpath=/usr/share/nut/www \
>> --with-pidpath=/var/run/nut \
>> --datadir=/usr/share/nut \
>> --with-pkgconfig-dir=/usr/lib/pkgconfig \
>> --with-user=nut --with-group=nut
>>
>>
>> I get this when I run upsdrvctl start
>>
>> Detected LiebertPSI on host 192.168.0.11 (mib: ietf 1.3)
>> [liebertpsiweb] unhandled ASN 0x6 recieved from 1.3.6.1.2.1.33.1.7.1.0
>>
>> Then when I run /etc/init.d/nut I get
>>
>> * Starting Network UPS Tools [
>> OK ]
>>
>> Broadcast Message from nut at mail.sop.com.my
>> (somewhere) at 1:02 ...
>>
>> Communications with UPS liebertpsiweb at localhost lost
>>
>> Running upsc liebertpsiweb at localhost gets me :
>>
>> battery.charge: 100.00
>> battery.current: 0.00
>> battery.runtime: 0.00
>> battery.runtime.low: 120.00
>> battery.temperature: 30.00
>> battery.voltage: 55.00
>> beeper.status: enabled
>> device.mfr: Emerson Network Power
>> device.model: LiebertPSI
>> device.type: ups
>> driver.name: snmp-ups
>> driver.parameter.mibs: auto
>> driver.parameter.pollinterval: 2
>> driver.parameter.port: 192.168.0.11
>> driver.version: 2.6.0
>> driver.version.internal: 0.50 (mib: ietf 1.3)
>> input.bypass.phases: 0.00
>> input.current: 0.00
>> input.frequency: 50.00
>> input.frequency.nominal: 50.00
>> input.phases: 1.00
>> input.realpower: 0.00
>> input.transfer.high: 0.00
>> input.transfer.low: 0.00
>> input.voltage: 247.00
>> input.voltage.nominal: 2300.00
>> output.current: 0.00
>> output.frequency: 50.00
>> output.frequency.nominal: 50.00
>> output.phases: 1.00
>> output.power.nominal: 0.00
>> output.realpower: 0.00
>> output.realpower.nominal: 0.00
>> output.voltage: 249.00
>> output.voltage.nominal: 2300.00
>> ups.firmware: EX000842
>> ups.firmware.aux: 2.39.CP504.ABE.00
>> ups.load: 17.00
>> ups.mfr: Emerson Network Power
>> ups.model: LiebertPSI
>> ups.start.auto: no
>> ups.status:
>> ups.test.result: done and passed
>> ups.timer.reboot: -1
>> ups.timer.shutdown: -1
>> ups.timer.start: -1
>>
>> What can I do or is this particular model not supported?
>>
>
> the support for this unit, and more generally Liebert SNMP support,
doesn't
> yet exist.
>
> the best for you is to check the MIB(s) supported, since Liebert may
provide
> its own, with a basic RFC 1628 (aka IETF MIB) supplement.
>
> if you're willing to work on this, we will help you.
> The idea is to create a lookup table between SNMP data and values to the
NUT
> ones, as done for example here (look for "snmp_info_t"):
> http://svn.debian.org/wsvn/nut/trunk/drivers/eaton-mib.c
>
> So, send us back an SNMP walk of the device, and start checking for
creating
> this mapping.
> Note that you may want to work with Philip Tait
>
http://lists.alioth.debian.org/pipermail/nut-upsdev/2011-February/005255.html
>
http://lists.alioth.debian.org/pipermail/nut-upsdev/2011-February/005263.html
>
> Have a special look at the 2nd thread!
>
> cheers,
> Arnaud
> --
> Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com
> Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
> Debian Developer - http://www.debian.org
> Free Software Developer - http://arnaud.quette.free.fr/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20110323/26ef0a75/attachment-0001.htm>