[Nut-upsuser] Liebert PSIXR 3000 intellislot web card support with NUT 2.6.0

[Arnaud Quette]

Hi John,

2011/3/16 John Huong <jahuong at gmail.com>

> Hi,
>
> Just started using NUT with a Liebert PSI-XR 3000 with an Intellislot web
> card.
>
> It seems I can't get it to run properly.
>
> I am using NUT 2.6.0 built from source on Ubuntu 8.0.4 .
>
> My build parameters are :
>
> ./configure --enable-strip
> --with-linux-hiddev=/usr/include/linux/hiddev.h
> --with-udev-dir=/lib/udev \
>            --prefix=/usr \
>            --exec-prefix=/ \
>            --sysconfdir=/etc/nut \
>            --mandir=/usr/share/man \
>            --libdir=/lib \
>            --includedir=/usr/include \
>            --without-ssl \
>            --with-dev \
>            --enable-static \
>            --with-statepath=/var/run/nut \
>            --with-altpidpath=/var/run/nut \
>            --with-drvpath=/lib/nut \
>            --with-htmlpath=/usr/share/nut/www \
>            --with-pidpath=/var/run/nut \
>            --datadir=/usr/share/nut \
>            --with-pkgconfig-dir=/usr/lib/pkgconfig \
>            --with-user=nut --with-group=nut
>
>
> I get this when I run upsdrvctl start
>
> Detected LiebertPSI on host 192.168.0.11 (mib: ietf 1.3)
> [liebertpsiweb] unhandled ASN 0x6 recieved from 1.3.6.1.2.1.33.1.7.1.0
>
> Then when I run /etc/init.d/nut I get
>
>  * Starting Network UPS Tools                                            [
> OK ]
>
> Broadcast Message from nut at mail.sop.com.my
>        (somewhere) at 1:02 ...
>
> Communications with UPS liebertpsiweb at localhost lost
>
> Running upsc liebertpsiweb at localhost gets me :
>
> battery.charge: 100.00
> battery.current: 0.00
> battery.runtime: 0.00
> battery.runtime.low: 120.00
> battery.temperature: 30.00
> battery.voltage: 55.00
> beeper.status: enabled
> device.mfr: Emerson Network Power
> device.model: LiebertPSI
> device.type: ups
> driver.name: snmp-ups
> driver.parameter.mibs: auto
> driver.parameter.pollinterval: 2
> driver.parameter.port: 192.168.0.11
> driver.version: 2.6.0
> driver.version.internal: 0.50 (mib: ietf 1.3)
> input.bypass.phases: 0.00
> input.current: 0.00
> input.frequency: 50.00
> input.frequency.nominal: 50.00
> input.phases: 1.00
> input.realpower: 0.00
> input.transfer.high: 0.00
> input.transfer.low: 0.00
> input.voltage: 247.00
> input.voltage.nominal: 2300.00
> output.current: 0.00
> output.frequency: 50.00
> output.frequency.nominal: 50.00
> output.phases: 1.00
> output.power.nominal: 0.00
> output.realpower: 0.00
> output.realpower.nominal: 0.00
> output.voltage: 249.00
> output.voltage.nominal: 2300.00
> ups.firmware: EX000842
> ups.firmware.aux: 2.39.CP504.ABE.00
> ups.load: 17.00
> ups.mfr: Emerson Network Power
> ups.model: LiebertPSI
> ups.start.auto: no
> ups.status:
> ups.test.result: done and passed
> ups.timer.reboot: -1
> ups.timer.shutdown: -1
> ups.timer.start: -1
>
> What can I do or is this particular model not supported?
>

the support for this unit, and more generally Liebert SNMP support, doesn't
yet exist.

the best for you is to check the MIB(s) supported, since Liebert may provide
its own, with a basic RFC 1628 (aka IETF MIB) supplement.

if you're willing to work on this, we will help you.
The idea is to create a lookup table between SNMP data and values to the NUT
ones, as done for example here (look for "snmp_info_t"):
http://svn.debian.org/wsvn/nut/trunk/drivers/eaton-mib.c

So, send us back an SNMP walk of the device, and start checking for creating
this mapping.
Note that you may want to work with Philip Tait
http://lists.alioth.debian.org/pipermail/nut-upsdev/2011-February/005255.html
http://lists.alioth.debian.org/pipermail/nut-upsdev/2011-February/005263.html

Have a special look at the 2nd thread!

cheers,
Arnaud
-- 
Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.free.fr/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20110323/76c129fd/attachment.htm>