[Nut-upsuser] Debian Squeeze / Powerware 9135 450KVA UPS
Gregory Skelton
gregory.skelton at gmail.com
Thu Jan 12 21:30:02 UTC 2012
Hi,
I have more information, I did some more digging and found a debugging
mode for the driver.. So this what I'm seeing. Any ideas how I get
around the "PW_COMMAND_START_BYTE"?
Thanks for any help.
Greg
<snip>
root at omen:/lib/nut# ./bcmxcp -a powerware -DDDDDDD -i 5 -x baud_rate=9600
Network UPS Tools - BCMXCP UPS driver 0.23 (2.4.3)
RS-232 communication subdriver 0.17
0.000000 debug level is '7'
0.871186 Connected to UPS on /dev/ttyS0 with baudrate 9600
0.871200 send_to_all: SETINFO device.type "ups"
0.871206 send_to_all: SETINFO driver.version "2.4.3"
0.871211 send_to_all: SETINFO driver.version.internal "0.23"
0.871216 send_to_all: SETINFO driver.name "bcmxcp"
1.155038 send_to_all: SETINFO ups.firmware "Cont:01.32 Inve:01.08
Rect:01.08 "
1.155050 send_to_all: SETINFO ups.power.nominal "500000"
1.155055 send_to_all: SETINFO output.phases "3"
1.155061 send_to_all: SETINFO ups.mfr "Eaton"
1.155070 send_to_all: SETINFO ups.model "Powerware Plus 500000i"
1.155073 Length of meter map: 81
1.155077 Index Offset Format NUT
1.155083 0000 0000 f0 output.L1-L2.voltage
1.155088 0001 0004 f0 output.L2-L3.voltage
1.155094 0002 0008 f0 output.L3-L1.voltage
1.155099 0003 0012 f0 input.L1-L2.voltage
1.155104 0004 0016 f0 input.L2-L3.voltage
1.155109 0005 0020 f0 input.L3-L1.voltage
1.155114 0009 0024 f0 None
1.155119 0010 0028 f0 None
1.155124 0011 0032 f0 None
1.155129 0018 0036 f0 input.L1.current
1.155134 0019 0040 f0 input.L2.current
1.155139 0020 0044 f0 input.L3.current
1.155152 0021 0048 f0 None
1.155158 0022 0052 f0 None
1.155163 0023 0056 f0 ups.power
1.155168 0024 0060 f0 None
1.155173 0025 0064 42 None
1.155178 0026 0068 42 None
1.155183 0027 0072 f0 output.frequency
1.155188 0028 0076 f0 input.frequency
1.155193 0029 0080 f0 None
1.155198 0030 0084 f0 None
1.155203 0032 0088 61 battery.current
1.155208 0033 0092 f0 battery.voltage
1.155213 0034 0096 f0 battery.charge
1.155218 0035 0100 f0 battery.runtime
1.155223 0059 0104 f0 None
1.155228 0060 0108 f0 None
1.155233 0061 0112 f0 None
1.155238 0065 0116 f0 output.L1.current
1.155244 0066 0120 f0 output.L2.current
1.155249 0067 0124 f0 output.L3.current
1.155254 0068 0128 f0 output.L1.current.nominal
1.155259 0069 0132 f0 output.L2.current.nominal
1.155264 0070 0136 f0 output.L3.current.nominal
1.155269 0071 0140 f0 None
1.155274 0072 0144 f0 None
1.155279 0073 0148 f0 None
1.155284 0078 0152 f0 output.L1-N.voltage
1.155289 0079 0156 f0 output.L2-N.voltage
1.155294 0080 0160 f0 output.L3-N.voltage
1.155299
1.155303 Length of alarm map: 25
1.155306 Index Alarm Supported
1.155311 0000 INVERTER_AC_OVER_VOLTAGE Yes
1.155316 0001 INVERTER_AC_UNDER_VOLTAGE Yes
1.155321 0002 INVERTER_OVER_OR_UNDER_FREQ Yes
1.155325 0003 BYPASS_AC_OVER_VOLTAGE Yes
1.155330 0004 BYPASS_AC_UNDER_VOLTAGE Yes
1.155334 0005 BYPASS_OVER_OR_UNDER_FREQ Yes
1.155339 0006 INPUT_AC_OVER_VOLTAGE Yes
1.155343 0007 INPUT_AC_UNDER_VOLTAGE Yes
1.155348 0008 INPUT_UNDER_OR_OVER_FREQ Yes
1.155352 0009 OUTPUT_OVER_VOLTAGE Yes
1.155357 0010 OUTPUT_UNDER_VOLTAGE Yes
1.155361 0011 OUTPUT_UNDER_OR_OVER_FREQ Yes
1.155366 -001 REMOTE_EMERGENCY_PWR_OFF No
1.155370 -001 REMOTE_GO_TO_BYPASS No
1.155375 0012 BUILDING_ALARM_6 Yes
1.155379 0013 BUILDING_ALARM_5 Yes
1.155384 0014 BUILDING_ALARM_4 Yes
1.155388 0015 BUILDING_ALARM_3 Yes
1.155392 0016 BUILDING_ALARM_2 Yes
1.155397 0017 BUILDING_ALARM_1 Yes
1.155404 -001 STATIC_SWITCH_OVER_TEMP No
1.155409 -001 CHARGER_OVER_TEMP No
1.155413 -001 CHARGER_LOGIC_PWR_FAIL No
1.155417 -001 CHARGER_OVER_VOLTAGE_OR_CURRENT No
1.155422 -001 INVERTER_OVER_TEMP No
1.155427 0018 OUTPUT_OVERLOAD Yes
1.155431 -001 RECTIFIER_INPUT_OVER_CURRENT No
1.155436 -001 INVERTER_OUTPUT_OVER_CURRENT No
1.155440 0019 DC_LINK_OVER_VOLTAGE Yes
1.155445 0020 DC_LINK_UNDER_VOLTAGE Yes
1.155449 0021 RECTIFIER_FAILED Yes
1.155453 -001 INVERTER_FAULT No
1.155458 0022 BATTERY_CONNECTOR_FAIL Yes
1.155462 0023 BYPASS_BREAKER_FAIL Yes
1.155467 -001 CHARGER_FAIL No
1.155471 -001 RAMP_UP_FAILED No
1.155476 -001 STATIC_SWITCH_FAILED No
1.155480 -001 ANALOG_AD_REF_FAIL No
1.155485 -001 BYPASS_UNCALIBRATED No
1.155489 0024 RECTIFIER_UNCALIBRATED Yes
1.155494 0025 OUTPUT_UNCALIBRATED Yes
1.155498 0026 INVERTER_UNCALIBRATED Yes
1.155503 -001 DC_VOLT_UNCALIBRATED No
1.155507 -001 OUTPUT_CURRENT_UNCALIBRATED No
1.155512 -001 RECTIFIER_CURRENT_UNCALIBRATED No
1.155516 -001 BATTERY_CURRENT_UNCALIBRATED No
1.155521 -001 INVERTER_ON_OFF_STAT_FAIL No
1.155525 0027 BATTERY_CURRENT_LIMIT Yes
1.155530 0028 INVERTER_STARTUP_FAIL Yes
1.155534 -001 ANALOG_BOARD_AD_STAT_FAIL No
1.155539 0029 OUTPUT_CURRENT_OVER_100 Yes
1.155543 -001 BATTERY_GROUND_FAULT No
1.155548 -001 WAITING_FOR_CHARGER_SYNC No
1.155552 -001 NV_RAM_FAIL No
1.155557 -001 ANALOG_BOARD_AD_TIMEOUT No
1.155561 0030 SHUTDOWN_IMMINENT Yes
1.155566 0031 BATTERY_LOW Yes
1.155570 -001 UTILITY_FAIL No
1.155575 -001 OUTPUT_SHORT_CIRCUIT No
1.155579 -001 UTILITY_NOT_PRESENT No
1.155584 -001 FULL_TIME_CHARGING No
1.155588 -001 FAST_BYPASS_COMMAND No
1.155593 -001 AD_ERROR No
1.155597 -001 INTERNAL_COM_FAIL No
1.155602 -001 RECTIFIER_SELFTEST_FAIL No
1.155606 -001 RECTIFIER_EEPROM_FAIL No
1.155611 -001 RECTIFIER_EPROM_FAIL No
1.155615 -001 INPUT_LINE_VOLTAGE_LOSS No
1.155620 0032 BATTERY_DC_OVER_VOLTAGE Yes
1.155624 -001 POWER_SUPPLY_OVER_TEMP No
1.155629 0033 POWER_SUPPLY_FAIL Yes
1.155633 -001 POWER_SUPPLY_5V_FAIL No
1.155638 -001 POWER_SUPPLY_12V_FAIL No
1.155642 0034 HEATSINK_OVER_TEMP Yes
1.155647 0035 HEATSINK_TEMP_SENSOR_FAIL Yes
1.155651 -001 RECTIFIER_CURRENT_OVER_125 No
1.155656 -001 RECTIFIER_FAULT_INTERRUPT_FAIL No
1.155660 -001 RECTIFIER_POWER_CAPASITOR_FAIL No
1.155665 -001 INVERTER_PROGRAM_STACK_ERROR No
1.155669 -001 INVERTER_BOARD_SELFTEST_FAIL No
1.155674 -001 INVERTER_AD_SELFTEST_FAIL No
1.155678 -001 INVERTER_RAM_SELFTEST_FAIL No
1.155683 -001 NV_MEMORY_CHECKSUM_FAIL No
1.155687 -001 PROGRAM_CHECKSUM_FAIL No
1.155692 -001 INVERTER_CPU_SELFTEST_FAIL No
1.155696 0036 NETWORK_NOT_RESPONDING Yes
1.155701 -001 FRONT_PANEL_SELFTEST_FAIL No
1.155705 -001 NODE_EEPROM_VERIFICATION_ERROR No
1.155710 -001 OUTPUT_AC_OVER_VOLT_TEST_FAIL No
1.155715 -001 OUTPUT_DC_OVER_VOLTAGE No
1.155719 0037 INPUT_PHASE_ROTATION_ERROR Yes
1.155724 -001 INVERTER_RAMP_UP_TEST_FAILED No
1.155728 -001 INVERTER_OFF_COMMAND No
1.155733 -001 INVERTER_ON_COMMAND No
1.155737 -001 TO_BYPASS_COMMAND No
1.155742 -001 FROM_BYPASS_COMMAND No
1.155746 -001 AUTO_MODE_COMMAND No
1.155750 0038 EMERGENCY_SHUTDOWN_COMMAND Yes
1.155755 -001 SETUP_SWITCH_OPEN No
1.155760 -001 INVERTER_OVER_VOLT_INT No
1.155764 -001 INVERTER_UNDER_VOLT_INT No
1.155769 -001 ABSOLUTE_DCOV_ACOV No
1.155773 -001 PHASE_A_CURRENT_LIMIT No
1.155777 -001 PHASE_B_CURRENT_LIMIT No
1.155782 -001 PHASE_C_CURRENT_LIMIT No
1.155786 0039 BYPASS_NOT_AVAILABLE Yes
1.155791 -001 RECTIFIER_BREAKER_OPEN No
1.155795 0040 BATTERY_CONTACTOR_OPEN Yes
1.155800 0041 INVERTER_CONTACTOR_OPEN Yes
1.155804 -001 BYPASS_BREAKER_OPEN No
1.155809 -001 INV_BOARD_ACOV_INT_TEST_FAIL No
1.155813 -001 INVERTER_OVER_TEMP_TRIP No
1.155818 -001 INV_BOARD_ACUV_INT_TEST_FAIL No
1.155823 -001 INVERTER_VOLTAGE_FEEDBACK_ERROR No
1.155827 -001 DC_UNDER_VOLTAGE_TIMEOUT No
1.155832 -001 AC_UNDER_VOLTAGE_TIMEOUT No
1.155836 -001 DC_UNDER_VOLTAGE_WHILE_CHARGE No
1.155841 -001 INVERTER_VOLTAGE_BIAS_ERROR No
1.155845 -001 RECTIFIER_PHASE_ROTATION No
1.155850 -001 BYPASS_PHASER_ROTATION No
1.155855 -001 SYSTEM_INTERFACE_BOARD_FAIL No
1.155859 -001 PARALLEL_BOARD_FAIL No
1.155863 -001 LOST_LOAD_SHARING_PHASE_A No
1.155868 -001 LOST_LOAD_SHARING_PHASE_B No
1.155872 -001 LOST_LOAD_SHARING_PHASE_C No
1.155877 -001 DC_OVER_VOLTAGE_TIMEOUT No
1.155936 0042 BATTERY_TOTALLY_DISCHARGED Yes
1.155943 -001 INVERTER_PHASE_BIAS_ERROR No
1.155948 -001 INVERTER_VOLTAGE_BIAS_ERROR_2 No
1.155953 -001 DC_LINK_BLEED_COMPLETE No
1.155957 -001 LARGE_CHARGER_INPUT_CURRENT No
1.155962 -001 INV_VOLT_TOO_LOW_FOR_RAMP_LEVEL No
1.155967 -001 LOSS_OF_REDUNDANCY No
1.155971 -001 LOSS_OF_SYNC_BUS No
1.155976 -001 RECTIFIER_BREAKER_SHUNT_TRIP No
1.155983 -001 LOSS_OF_CHARGER_SYNC No
1.155994 -001 INVERTER_LOW_LEVEL_TEST_TIMEOUT No
1.155999 -001 OUTPUT_BREAKER_OPEN No
1.156003 -001 CONTROL_POWER_ON No
1.156008 -001 INVERTER_ON No
1.156014 -001 CHARGER_ON No
1.156019 -001 BYPASS_ON No
1.156023 -001 BYPASS_POWER_LOSS No
1.156028 -001 ON_MANUAL_BYPASS No
1.156033 -001 BYPASS_MANUAL_TURN_OFF No
1.156037 -001 INVERTER_BLEEDING_DC_LINK_VOLT No
1.156042 -001 CPU_ISR_ERROR No
1.156046 -001 SYSTEM_ISR_RESTART No
1.156051 -001 PARALLEL_DC No
1.156055 -001 BATTERY_NEEDS_SERVICE No
1.156060 -001 BATTERY_CHARGING No
1.156068 0043 BATTERY_NOT_CHARGED Yes
1.156073 -001 DISABLED_BATTERY_TIME No
1.156079 -001 SERIES_7000_ENABLE No
1.156085 -001 OTHER_UPS_ON No
1.156090 -001 PARALLEL_INVERTER No
1.156096 -001 UPS_IN_PARALLEL No
1.156101 -001 OUTPUT_BREAKER_REALY_FAIL No
1.156106 -001 CONTROL_POWER_OFF No
1.156110 -001 LEVEL_2_OVERLOAD_PHASE_A No
1.156115 -001 LEVEL_2_OVERLOAD_PHASE_B No
1.156121 -001 LEVEL_2_OVERLOAD_PHASE_C No
1.156126 -001 LEVEL_3_OVERLOAD_PHASE_A No
1.156132 -001 LEVEL_3_OVERLOAD_PHASE_B No
1.156137 -001 LEVEL_3_OVERLOAD_PHASE_C No
1.156143 -001 LEVEL_4_OVERLOAD_PHASE_A No
1.156148 -001 LEVEL_4_OVERLOAD_PHASE_B No
1.156155 -001 LEVEL_4_OVERLOAD_PHASE_C No
1.156159 0044 UPS_ON_BATTERY Yes
1.156165 0045 UPS_ON_BYPASS Yes
1.156170 0046 LOAD_DUMPED Yes
1.156176 -001 LOAD_ON_INVERTER No
1.156180 -001 UPS_ON_COMMAND No
1.156185 -001 UPS_OFF_COMMAND No
1.156191 -001 LOW_BATTERY_SHUTDOWN No
1.156197 -001 AUTO_ON_ENABLED No
1.156202 -001 SOFTWARE_INCOMPABILITY_DETECTED No
1.156206 -001 INVERTER_TEMP_SENSOR_FAILED No
1.156212 -001 DC_START_OCCURED No
1.156219 -001 IN_PARALLEL_OPERATION No
1.156225 -001 SYNCING_TO_BYPASS No
1.156229 -001 RAMPING_UPS_UP No
1.156235 -001 INVERTER_ON_DELAY No
1.156240 -001 CHARGER_ON_DELAY No
1.156245 -001 WAITING_FOR_UTIL_INPUT No
1.156250 -001 CLOSE_BYPASS_BREAKER No
1.156256 -001 TEMPORARY_BYPASS_OPERATION No
1.156261 -001 SYNCING_TO_OUTPUT No
1.156267 -001 BYPASS_FAILURE No
1.156272 -001 AUTO_OFF_COMMAND_EXECUTED No
1.156277 -001 AUTO_ON_COMMAND_EXECUTED No
1.156283 -001 BATTERY_TEST_FAILED No
1.156289 -001 FUSE_FAIL No
1.156293 0047 FAN_FAIL Yes
1.156299 -001 SITE_WIRING_FAULT No
1.156304 -001 BACKFEED_CONTACTOR_FAIL No
1.156338 -001 ON_BUCK No
1.156343 -001 ON_BOOST No
1.156347 -001 ON_DOUBLE_BOOST No
1.156352 -001 BATTERIES_DISCONNECTED No
1.156356
1.156360 Length of Config_block: 48
1.156366 Length of statistics map: 62
1.156371 Length of command list: 4047
1.156375 Length of outlet_block: 33650
1.156380 Length of alarm_block: 34179
2.157495 Receive error (PW_COMMAND_START_BYTE): 0!!!
3.158599 Receive error (PW_COMMAND_START_BYTE): 0!!!
4.159701 Receive error (PW_COMMAND_START_BYTE): 0!!!
4.159712 Communications with UPS lost: Error executing command
4.159717 Could not communicate with the ups
</snip>
On Thu, Jan 12, 2012 at 2:38 PM, Gregory Skelton
<gregory.skelton at gmail.com> wrote:
> Hi All,
>
> I'm a system administrator of a large data center, and I've recently
> replaced the machine that acted as the nut master for our
> cluster/cloud. The machine that was interfacing with our Powerware
> 9135 450KVA 3 phase UPS, not to confused with Eaton's Powerware 9135,
> and was a Fedora Core 4 box running nut version 2.0.3-4 connected by a
> serial cable.
>
> We are using these versions of nut on our FC4 machine:
> Network UPS Tools - UPS driver controller 2.1.0
> Network UPS Tools - BCMXCP UPS driver 0.11 (2.1.0)
>
> We've had intermittent UPS driver problem, but it worked. Now I'm
> trying to connect to our UPS using this new machine and I get this:
>
> root at omen:/etc/nut# upsdrvctl start
> Network UPS Tools - UPS driver controller 2.4.3
> Network UPS Tools - BCMXCP UPS driver 0.23 (2.4.3)
> RS-232 communication subdriver 0.17
> Connected to UPS on /dev/ttyS0 with baudrate 9600
> Communications with UPS lost: Error executing command
> Could not communicate with the ups
> Driver failed to start (exit status=1)
>
> I've tried to google for an answer and found a great reference, but I
> haven't been able to communicate with the UPS
> http://blog.shadypixel.com/monitoring-a-ups-with-nut-on-debian-or-ubuntu-linux/
>
> Is there any diagnostics or log files I can create to track down this
> problem? "Driver failed to start (exit status=1)" isn't all that
> helpful
>
> Thanks in advance for any and all help.
>
> Best,
> Greg
>
> PS I have both machines, so if I missed anything I can get it for you.
More information about the Nut-upsuser
mailing list