[Nut-upsuser] Tripp Lite SMART2200CRMXL

[deadrabbit]

Thanks for the suggestion. Trying usbhid-ups results in an error
suggesting that a newer version of NUT may support it, so I'll give
that a try.

On Sat, Jun 16, 2012 at 3:57 AM, Charles Lepple <clepple at gmail.com> wrote:
> On Jun 15, 2012, at 1:12 PM, deadrabbit wrote:
>
>> I'm trying to get a SMART2200CRMXL to work with nut, using a USB
>> cable. tripplite_usb -a upsname returns:
>>
>> Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1 (2.2.2)
>> Warning: This is an experimental driver.
>> Some features may not function correctly.
>>
>> No matching USB/HID UPS found
>>
>> My system info:
>> CentOS 5.5
>> nut installed from repo
>> upsd version 2.2.2
>> TrippLite SMART2200CRMXL
>> (http://www.tripplite.com/en/products/model.cfm?txtModelID=3825)
>
> [...]
>
>> Checking device (09AE/3014) (003/003)
>> - VendorID: 09ae
>> - ProductID: 3014
>> - Manufacturer: unknown
>> - Product: unknown
>> - Serial Number: unknown
>> - Bus: 003
>> Trying to match device
>> Device does not match - skipping
>
> This is your UPS, but it is actually covered by the usbhid-ups driver (tripplite_usb only handles Product ID 0001). I think later versions of NUT will print a message to that effect.
>
> Also, I don't know that usbhid-ups knows about your model in v2.2.2, but you can try it. If not, you probably need to upgrade to at least NUT v2.4.0 or later. I think there are some RHEL/Centos RPMs floating around.
>
> --
> Charles Lepple
> clepple at gmail
>
>
>