[Nut-upsuser] SURT8000XL+AP9619

[Arnaud Quette]

2012/4/27 Тимофей Целищев <mrtstv at mail.ru>

>
> Fri, 27 Apr 2012 10:24:38 +0200 от Arnaud Quette <aquette.dev at gmail.com>:
>
>  Hi,
>
> first, please subscribe to the mailing list prior to any further mail:
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
>
> 2012/4/27 Тимофей Целищев <mrtstv at mail.ru<http://e.mail.ru/cgi-bin/sentmsg?compose&To=mrtstv@mail.ru>
> >
>
> Hello!
> I have the APC SURT8000XL whith AP9619. I connect it to the NUT whith the
> snmp-ups driver, but have the error: "[SURT8000XL] Warning: excessive poll
> failures, limiting error reporting". The OS is FreeBSD 9.0.
> The APC SU5000I whith the AP9617 connecting to NUT - OK!
>
> ups.conf
> [SURT8000XL]
>    driver = snmp-ups
>   port = xxx.xxx.xxx.xxx
>    community = public
>   desc = "SURT8000XL"
>
>
> please send a compressed driver debug output, Ie:
> $ /path/to/snmp-ups -DDDDD -a SURT8000XL
>
> let it run for a couple of minutes before stopping it with Ctrl+C.
>
> cheers,
> Arnaud
> --
> Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com
> Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
> Debian Developer - http://www.debian.org
> Free Software Developer - http://arnaud.quette.free.fr/
>
>   The debug: snmp-ups -DDDDD -a SURT8000XL
>
> 12.257853 SU_CMD_MASK => .1.3.6.1.4.1.318.1.1.1.6.2.6.0
> 12.257856 SU_CMD_MASK => .1.3.6.1.4.1.318.1.1.1.6.2.1.0
> 12.257860 SU_CMD_MASK => .1.3.6.1.4.1.318.1.1.1.6.1.1.0
> 12.257863 SU_CMD_MASK => .1.3.6.1.4.1.318.1.1.1.6.2.4.0
> 12.257866 SU_CMD_MASK => .1.3.6.1.4.1.318.1.1.1.6.2.5.0
> 12.257869 SU_CMD_MASK => .1.3.6.1.4.1.318.1.1.1.6.2.7.0
> 12.257872 SU_CMD_MASK => .1.3.6.1.4.1.318.1.1.1.6.2.7.0
> 12.257876 SU_CMD_MASK => .1.3.6.1.4.1.318.1.1.1.7.2.2.0
> 12.257879 SU_CMD_MASK => .1.3.6.1.4.1.318.1.1.1.7.2.5.0
> 12.257882 SU_CMD_MASK => .1.3.6.1.4.1.318.1.1.1.7.2.5.0
> 12.257885 SU_CMD_MASK => .1.3.6.1.4.1.318.1.1.1.9.1.1.0
> 12.257892 send_to_all: SETINFO ups.status "OL"
> 12.259132 dstate_init: sock /var/db/nut/snmp-ups-SURT8000XL open on fd 5
> 12.259141 send_to_all: SETINFO driver.parameter.pollinterval "2"
> 12.259148 send_to_all: SETINFO device.mfr "APC"
> 12.259154 send_to_all: SETINFO device.model "Smart-UPS RT 8000 XL"
> 12.259160 send_to_all: SETINFO device.serial "IS0907001037"
> 12.259164 SNMP UPS driver : entering upsdrv_updateinfo()
> 14.259484 SNMP UPS driver : entering upsdrv_updateinfo()
> 16.260485 SNMP UPS driver : entering upsdrv_updateinfo()
> 18.261482 SNMP UPS driver : entering upsdrv_updateinfo()
> 20.262484 SNMP UPS driver : entering upsdrv_updateinfo()
> ^C 20.841080 Signal 2: exiting
>
> I really need the complete trace of the first 2 minutes.
you trimmed the above to 8 seconds, between 12 and 20, which is not
sufficient...

I also need an upsc output.

cheers,
Arnaud
-- 
Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.free.fr/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20120502/45aa95ed/attachment.html>