[Nut-upsuser] i am stuck with setup :)

[Vladimir Micovic]

Sorry for spam, just to paste conf. file again:

[root at optimus etc]#  cat ups.conf
[local_mon]
        driver = blazer_usb
        port = /dev/ttyS0
        desc = "Galaxy.UPS"
[root at optimus etc]# cat upsd.conf
[root at optimus etc]# cat upsd.users
[local_mon]
password = qwerty321
upsmon master
[root at optimus etc]# cat upsmon.conf
MONITOR local_mon at localhost 1 local_mon qwerty321 master
POWERDOWNFLAG /etc/killpower
# SHUTDOWNCMD "/sbin/shutdown -h now"
[root at optimus etc]# cat upssched.conf
CMDSCRIPT /usr/local/ups/bin/upssched-cmd

-----Original Message-----
From: nut-upsuser-bounces+vladimir=micovic.com at lists.alioth.debian.org
[mailto:nut-upsuser-bounces+vladimir=micovic.com at lists.alioth.debian.org] On
Behalf Of Vladimir Micovic
Sent: Saturday, May 19, 2012 7:10 PM
To: 'Charles Lepple'
Cc: 'NUT Users'
Subject: Re: [Nut-upsuser] i am stuck with setup :)

Update:

I resolve prob. Which was with permissions in /var/state And now when I try
to start upsdrvctl I got:
# bin/upsdrvctl  start local_mon
Network UPS Tools - UPS driver controller 2.6.3 Network UPS Tools -
Megatec/Q1 protocol USB driver 0.04 (2.6.3) Can't claim USB device
[0665:5161]: could not detach kernel driver from interface 0: Operation not
permitted Driver failed to start (exit status=1)

-----Original Message-----
From: Charles Lepple [mailto:clepple at gmail.com]
Sent: Saturday, May 19, 2012 5:52 PM
To: Vladimir Micovic
Cc: 'Arnaud Quette'; 'NUT Users'
Subject: Re: [Nut-upsuser] i am stuck with setup :)

On May 18, 2012, at 7:29 PM, Vladimir Micovic wrote:

> How do you mean how I start?
> If you think on user, I put ups.conf "user = root" 

I don't think I remember seeing which OS you are using, so I don't know what
scripts start programs like upsd or upsmon.

I tend not to run with "user = root", so I am not sure what the implications
are. I prefer to run NUT unprivileged, with udev rules to set the proper
permissions on the /dev node for the UPS. If upsd and the driver both run
under the same user ID, you shouldn't get the "Permission denied" message
you listed below.

> -----Original Message-----
> From: Charles Lepple [mailto:clepple at gmail.com]
> Sent: Friday, May 18, 2012 3:33 AM
> To: Vladimir Micovic
> Cc: 'Arnaud Quette'; 'NUT Users'
> Subject: Re: [Nut-upsuser] i am stuck with setup :)
> 
> On May 17, 2012, at 3:44 PM, Vladimir Micovic wrote:
> 
>> Anyway, upsd say next: http://pastebin.com/n1SGBZXL
> 
> If it's less than 10 lines, pastebin is pretty silly... our attachment 
> size limit is 40KB, not 40 bytes :-)
> 
>> Network UPS Tools upsd 2.6.3
>> /usr/local/ups/etc/upsd.conf is world readable listening on
>> 192.168.1.40 port 3493 Can't connect to UPS [local_mon]
>> (blazer_usb-local_mon): Permission denied 
>> /usr/local/ups/etc/upsd.users is world readable
> 
> How did you start the driver and upsd?
> 
> (upsmon depends on upsd, so we need to fix upsd first)

--
Charles Lepple

A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing on usenet and in e-mail?


_______________________________________________
Nut-upsuser mailing list
Nut-upsuser at lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser