[Nut-upsuser] driver looking for MAXIM MXE II

[Walter O. Dari]

Results:

wodari at svrsw2:/usr/local/MonitorSoftware$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 06da:0201 Phoenixtec Power Co., Ltd
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


1
------------------------------------------------------------------------
ups.conf

[maxim]
     driver = blazer_usb
     port = auto
     desc = "SW servers"


wodari at svrsw2:~$ /sbin/upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.4.3)
No supported devices found. Please check your device availability with 
'lsusb'
and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with at least 'subdriver', 'vendorid' and 'productid'
options specified. Please refer to the man page for details about these 
options
(man 8 blazer).

Driver failed to start (exit status=1)
------------------------------------------------------------------------

2
------------------------------------------------------------------------
ups.conf

[maxim]
     driver = megatec_usb
     port = auto
     desc = "SW servers"


wodari at svrsw2:~$ /sbin/upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - Megatec protocol driver 1.6 (2.4.3)
Serial-over-USB transport layer 0.10
No supported devices found. Please check your device availability with 
'lsusb'
and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with at least 'vendorid' and 'subdriver' options
specified. Please refer to the man page for details about these options
(man 8 megatec_usb).
Please report your results to the NUT user's mailing list
<nut-upsuser at lists.alioth.debian.org>.

Driver failed to start (exit status=1)
------------------------------------------------------------------------

3
------------------------------------------------------------------------
ups.conf

[maxim]
     driver = bcmxcp_usb
     port = auto
     desc = "SW servers"


wodari at svrsw2:~$ /sbin/upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - BCMXCP UPS driver 0.23 (2.4.3)
USB communication subdriver 0.18
Can't open POWERWARE USB device, retrying ...
Can't open POWERWARE USB device, retrying ...
Can't open POWERWARE USB device, retrying ...
------------------------------------------------------------------------

4
------------------------------------------------------------------------
ups.conf

[maxim]
     driver = tripplite_usb
     port = auto
     desc = "SW servers"


wodari at svrsw2:~$ /sbin/upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.20 (2.4.3)
Warning: This is an experimental driver.
Some features may not function correctly.

No matching USB/HID UPS found
Driver failed to start (exit status=1)
------------------------------------------------------------------------


More info...

I'm use Debian Squeeze

wodari at svrsw2:~$ uname -a
Linux svrsw2 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 
GNU/Linux

wodari at svrsw2:~$ upsrw maxim
Can't connect: Connection failure: Connection refused

wodari at svrsw2:~$ upscmd -l maxim
Error: Connection failure: Connection refused



Walter




El 23/11/12 04:18, Arnaud Quette escribió:
> HolÃ
>
> Try blazer_usb. Please report back if everything is working as per
> http://www.networkupstools.org/stable-hcl.html#footnotes
>
> Cheers
> Arnaud
> (sent from my S3... please excuse my brevity)
>
> Le 21 nov. 2012 23:13, "Walter O. Dari" <wlinuxw at gmail.com
> <mailto:wlinuxw at gmail.com>> a écrit :
>
>     Hello:
>
>     I have a UPS model MXE II MAXIM brand online, 3500VA 2100W.
>     Connects to the PC by a USB 2.0 port.
>     I wanted to use nut, but this brand is not on the list of nut drivers.
>
>     lsusb returns:
>
>     ...
>     Bus 003 Device 003: ID 06DA: 0201 Phoenixtec Power Co., Ltd
>     ...
>
>     I did not find this manufacturer in the driver list.
>
>     Anyone know if you can have compatibility with other make and model
>     of UPS.
>
>     With what driver it could start testing?
>
>     Greetings and thanks,
>     Walter
>
>     (original Spanish text translated by Google)